Re: SSA disk configurations
2001-09-12 10:41:11
Subject: |
Re: SSA disk configurations |
From: |
"PINNI, BALANAND (SBCSI)" <bp3965 AT SBC DOT COM> |
Date: |
Wed, 12 Sep 2001 09:41:42 -0500 |
I know how to solve the problem.
If u have drive put back in to get ODM updated.
If not
U have to follow the following procedure.
#lqueryvg -p hdisk0 -At Read original VGDA Area when original disk was
present hdisk1 from hdisk0.
#lspv
dd if=/dev/hdisk0 count=1 |od -x |grep 0000200<<<<This is the offset
address.
0000200 0000..............0000 this is the ID for new disk attached.
#odmget -q "name=hdisk0" CuDv >>/tmp/hdiskX.add
#odmget -a "-name=hdisk0" CuAt >>/tmp/hdiskX.add
NoW UPDATE odm TO ORIGINAL VALUE disk ID THAT U GOT WITH lqueryvg
#odmchange use this cmd.
now
reducevg vgname hdiskx
rmdev hdiskx
Look at ODM cmds very closely.If u have problem in understanding ??Good
luck.
U need to read ODM and VGDA.
Balnanand Pinni
|
|
|