ADSM-L

Re: New M80

2001-08-08 11:36:55
Subject: Re: New M80
From: Fiona Speakes <Fiona.Speakes AT TELEWEST.CO DOT UK>
Date: Wed, 8 Aug 2001 16:23:25 +0100
Hi Geoff,

We've done something similar recently.  We've installed an M80 and moved to
server 4.2.  You'll find a server patch out there already - 4.2.0.1 - and
there are known issues with this.  You'll find that you can only register
each licence file once, so you can't register  - for example - 3 sets of the
50mgsyslan.lic files.  This is awaiting an APAR from Tivoli - no date for
this yet.  You'll have to run with your server out of licence compliance for
a while - doesn't do any harm, but puts loads of messages in the activity
log.

We installed server 4.2 as a new install, then applied patch 4.2.0.1 and
upgraded the db.  We then took a dbsnapshot of an exisiting database and put
that onto the M80.  This wasn't so bad as the M80 was replacing the other
server.  One thing to be careful of if your doing this is that co-location
isn't set to yes.  If it is, the server will look for the tapes in the other
server (caused us a small problem as the 'original' server is still live
too!)

We're doing this again in a couple of weeks!  (Replacing an S7A with an
M80).

Do you know that TSM server 4.2 seems to need AIX 4.3.3 to run?  There's
also been a change with the DRM licence - there's a line in one of the
readme's that tells you about it - but I can't remember which one.

Good luck!

Fiona Speakes
0151 289 7076
07788 578497


<Prev in Thread] Current Thread [Next in Thread>