There should have been a driver for your fiber card and some configuration
stuff for that and there should be an IBM driver for the drive.  You
probably won't need the drive driver as I think ADSMSCSI supports the 3590
directly, but I could be wrong so check.  There is a driver for the library
as well.  I think both of those can be found on the ftp site under
/storage/devdrvr.

If you go into the TSM Utilities, Device Manager you should see the drives
and library there.

Kelly J. Lipp
Storage Solutions Specialists, Inc.
PO Box 51313
Colorado Springs CO 80949-1313
(719) 531-5926
Fax: (240) 539-7175
Email: lipp AT storsol DOT com or lipp AT storserver DOT com
www.storsol.com
www.storserver.com