Hi!
Some days ago our NT attached 3570 started to have errors indicating
ANR8302E I/O error on drive TAPE1 (MT0.0.0.1) (OP=WRITE,
CC=305, KEY=04, ASC=44, ASCQ=00,
SENSE=F0.00.04.00.1E.80.F0.48.00.00.00.00.44.00.FE.0B.35-
.30.10.00.00.01.01.31.08.28.C5.4F.E4.80.0A.E0.01.35.30.E-
0.01.33.12.07.80.33.54.FF.07.00.00.03.47.90.00.EC.3B.3F.-
00.00.00.FF.00.03.47.5D.05.00., Description=Drive
failure). Refer to Appendix B in the 'Messages'
manual
for recommended action.
ADSM then marks the Tape R/O and later on tries to repair a defective VCR
ANR8820W Repairing VCR data for Volume RNC03 in drive
TAPE1 (MT0.0.0.1); mount may be delayed
I remember that some days ago there was a discussion thread going on
mentioning microcode levels etc.
Can sombeody enlighten me or send me the postings again? TIA
Mit freundlichem Gruss/Best Regards
Michael Abel
IBM Certified Advanced Technical Expert - RS/6000 AIX
=====================================================
res nova Unternehmensberatung GmbH
...aktiv in AIX
MAIL: Ruppmannstrasse 41
D-70565 Stuttgart, Germany
FON: +49 711 78888 0
FAX: +49 711 78888 99
WWW: http://www.resnova.de
EMAIL: mailto:Michael.Abel AT resnova DOT de
|