>
>24 Backup Storage Pool  Primary Pool TAPEPOOL, Copy Pool COPYPOOL, Files
>Backed Up: 0, Bytes Backed Up: 0, Unreadable Files: 0, Unreadable Bytes: 0.
>Current Physical File (bytes): 47,132,333
>
>Waiting for multiple mount points in device class 3570 (631022 seconds).
>
>Q MOUNT gives:
>ANR2034E QUERY MOUNT: No match found using this criteria.
>
>So, it looks like ADSM is waiting for mountpoints which ARE available!
>The only solution I found to recover from this is to stop and start the
>server.
>

Eric,
        Try using the 'show libr' command.  It is undocumented, but it will 
give you
some insight into what AIX thinks about the drives.  One thing that is
important is the line about the drive being busy:

    DRIVE02 (/dev/rmt2):
      type=8, mod=17, busy=0, online=1,
      avail=1, polled=0, elem=65535, createPending=0,
      ...


If busy=1 and your "q mount" command shows there is nothing mounted then(as we
have found) the discrepency can be corrected by restarting /etc/lmcpd.  I hope
this applies to your library, I'm only familiar with our 3494.

-Matt
*---------------------------------------------------------*
*---------------------------------------------------------*
Matt Bacchi                            v2bacchi AT btv.ibm DOT com
IBM Microelectronics DCS                     (802) 769-4072
ADSM & AFS Backup                            (tie) 446-4072