A couple of possibilities:
1> If you are using 3590 drives/cart you MUST specify "devt=3590" with the
checkin command.
2> If you are using "J" labelled tapes (3590), leave off the "J" in the
volume #.
Also, with the 3494 you can add "search=yes" it will automatically find
all the volumes for you in category FF00 (inserted). I.e., you don't have
to specify individual volume numbers.
Hope this helps,
-Scott
________________________________________________________________________
________________________________________________________________________
L. Scott Emmons | CableData R&D Center - El Dorado Hills, CA, USA
Staff Software Engineer| Special Projects, Systems Development Dept
(916) 939-6088 | Views and content are my own, not CableData's
>-----Original Message-----
>I am having a bit of trouble checking in volumes into a 349x ATL.
>I can add a volume to a pool I have defined as "AUTOPOOL", but when
>I try to check in the volume under the "libraries and drives" /
>"library volumes" web interface I get these messages:
>
>
>ANR0609I CHECKIN LIBVOLUME started as process 14.
>
>ANR0984I Process 14 for CHECKIN LIBVOLUME started in the
>BACKGROUND at 09:42:24.
>
>ANR8422I CHECKIN LIBVOLUME: Operation for library TLAA started
>as process 14.
>
>ANR1434W No files have been identified for automatically storing device
>configuration information.
>
>ANR8426E CHECKIN LIBVOLUME for volume JH0001 in library TLAA failed.
|