Thanks for the info Tim.

                -bill hankard
                whankard AT tesent DOT com

>-----Original Message-----
>From:  Tim Mortimer [SMTP:tim_mortimer AT VNET.IBM DOT COM]
>Sent:  Monday, March 03, 1997 9:29 PM
>To:    ADSM-L AT VM.MARIST DOT EDU
>Subject:       Re: ADSM NT4.0 and Seagate
>
>Bill,
>Firstly, ADSM/NT does not install drivers in the same way as other NT
>apps. It does not provide an .INF file for installation via Control
>Panel. Installing the server via setup also installs the ADSMSCSI
>device driver.
>
>You don't state what level of the ADSM server you have. If you have
>the 2.1.0.9 level (ADSMSCSI.SYS will have an 8/96 or 9/96 date stamp),
>you will need to upgrade it to the later level (2.1.0.12). This can
>be downloaded from the WW or directly from the anonymous FTP server:
> ftp://index.storsys.ibm.com/adsm/fixes/v2r1/ntsrv/ptf1/
>Installing this by running the setup program will upgrade all the ADSM
>componants to the latest level including the ADSMSCSI driver which
>should end up with a 11/18/96 date stamp. This is the level that support
>your Compaq 4/16 autoloader.
>
>Otherwise your config looks fine.
>
>Cheers,
>Tim Mortimer
>ITSO San Jose
>Internet: Tim_Mortimer AT vnet.ibm DOT com