LAN-Free and Qlogic HBA Settings

[dehansen]

In the process of setting up a W2K server to backup LAN-Free. I have found conflicting information on the settings for the Qlogic HBA (QLA2200F, BIOS Version: 1.76, Device Driver: SCSIport 8.1.5.64). Can anyone verify which of the following settings are correct to allow me to attach the HBA to an IBM 2109-F16 Fibre switch which attaches to an IBM 3494 Library (3592E05 tape drives):



Execution Throttle: 100 or 255

Fibre Channel Tape Support: Disabled or Enabled

Fibre Channel Confirm: Disabled or Enabled

Command Reference Number: Disabled or Enabled



Thx

 

[renever]

fibre channel tape support should be enabled. Other ones i don't know

 

[henke]

Hi !



All the settings for Qlogic adapters to be used with IBM Ultrium drives can be found

on this site.



http://www.redbooks.ibm.com/abstracts/tips0250.html?Open



/Henke