I/O Erros when trying to check tapes into library

[heath156]

Hello, I had problems with all the drives the library and the paths, these had to be re-created due to SCSI ID problems. Once this happened the q libv cmd didn't bring anything back, I am now trying to checkin tapes to the library but I keep getting the following error:



04/13/2006 08:02:06 ANR8300E I/O error on library 3584LIB (OP=8401C05C,

CC=207, KEY=FF, ASC=FF, ASCQ=FF, SENSE=**NONE**,

Description=Device is not in a state capable of

performing request). Refer to Appendix D in the

'Messages' manual for recommended action.

04/13/2006 08:02:06 ANR8310E An I/O error occurred while accessing library

3584LIB.



Any ideas as to why this is happening, all the drives library and paths are correct i have checked them many times



Thanks

 

[cheffern]

Hi -



When you redefine the paths & the drives, are you entering the elements and the SN's for each drive? And does "q drive" and "q path" show everything online?



Also - this could actually be an arm/changer issue within the library if it cannot move it at all...