DV8
ADSM.ORG Member
/proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: Quantum Model: DLT4000 Rev: D67E
Type: Sequential-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: Quantum Model: DLT4000 Rev: D67E
Type: Sequential-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 03 Lun: 00
Vendor: Quantum Model: DLT4000 Rev: D67E
Type: Sequential-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 04 Lun: 00
Vendor: Quantum Model: DLT4000 Rev: D67E
Type: Sequential-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 05 Lun: 00
Vendor: HP Model: C1194F Rev: 1.03
Type: Medium Changer ANSI SCSI revision: 02
The HP alphbet soup C1194F translates to a 4448
lb.conf
HOST[0]=0
CHANNEL[0]=0
ID[0]=5
LUN[0]=1
mt.conf
HOST[0]=0
CHANNEL[0]=0
ID[0]=1
LUN[0]=0
HOST[1]=0
CHANNEL[1]=0
ID[1]=2
LUN[1]=0
HOST[2]=0
CHANNEL[2]=0
ID[2]=3
LUN[2]=0
HOST[3]=0
CHANNEL[3]=0
ID[3]=4
LUN[3]=0
uname -a
Linux dhcp64-253 2.4.19-4GB #1 Mon Oct 21 18:45:41 UTC 2002 i686 unknown
dmesg
Linux version 2.4.19-4GB ([email protected]) (gcc version 3.2) #1 Mon Oct 21 18:45:41 UTC 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000010000000 (usable)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
Scanning bios EBDA for MXT signature
256MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
Advanced speculative caching feature not present
On node 0 totalpages: 65536
zone(0): 4096 pages.
zone(1): 61440 pages.
zone(2): 0 pages.
ACPI disabled because your bios is from 99 and too old
You can enable it with acpi=force
Building zonelist for node : 0
Kernel command line: root=/dev/hda3 vga=788
Initializing CPU#0
Detected 398.273 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 794.62 BogoMIPS
Memory: 255372k/262144k available (1556k kernel code, 6384k reserved, 572k data, 156k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000
CPU: Common caps: 0183f9ff 00000000 00000000 00000000
CPU: Intel Pentium II (Deschutes) stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([email protected])
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20020829
ACPI: Disabled via blacklist or command line
PCI: PCI BIOS revision 2.10 entry at 0xed9a0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router PIIX [8086/7110] at 00:14.0
Limiting direct PCI/PCI transfers.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
mxt_scan_bios: enter
Starting kswapd
bigpage subsystem: allocated 0 bigpages (=0MB).
kinoded started
VFS: Diskquotas version dquot_6.5.0 initialized
aio_setup: num_physpages = 16384
aio_setup: sizeof(struct page) = 48
vesafb: framebuffer at 0x40000000, mapped to 0xd080d000, size 8192k
vesafb: mode is 800x600x16, linelength=1600, pages=7
vesafb: protected mode interface info at c000:483d
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... found (800x600, 14181 bytes).
Console: switching to colour frame buffer device 98x33
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev a1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x20a0-0x20a7, BIOS settings: hda
MA, hdbio
ide1: BM-DMA at 0x20a8-0x20af, BIOS settings: hdcio, hddio
hda: FUJITSU MPC3064AT, ATA DISK drive
hdc: Compaq CRD-8322B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c03a8e24, I/O limit 4095Mb (mask 0xffffffff)
hda: safely enabled flush
hda: 12594960 sectors (6449 MB), CHS=833/240/63, UDMA(33)
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2 hda3
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 16 devices)
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
ide-floppy driver 0.99.newide
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 443k freed
VFS: Mounted root (ext2 filesystem).
PCI: Found IRQ 11 for device 00:10.0
PCI: Sharing IRQ 11 with 00:14.2
scsi: limiting sg entries to 204
qlogicisp : new isp1020 revision ID (5)
scsi0 : QLogic ISP1020 SCSI on PCI bus 00 device 80 irq 11 MEM base 0xd1013000
Vendor: Quantum Model: DLT4000 Rev: D67E
Type: Sequential-Access ANSI SCSI revision: 02
Vendor: Quantum Model: DLT4000 Rev: D67E
Type: Sequential-Access ANSI SCSI revision: 02
Vendor: Quantum Model: DLT4000 Rev: D67E
Type: Sequential-Access ANSI SCSI revision: 02
Vendor: Quantum Model: DLT4000 Rev: D67E
Type: Sequential-Access ANSI SCSI revision: 02
Vendor: HP Model: C1194F Rev: 1.03
Type: Medium Changer ANSI SCSI revision: 02
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (ide0(3,3)) for (ide0(3,3))
reiserfs: replayed 3 transactions in 0 seconds
reiserfs: using ordered data mode
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 156k freed
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.5(mp-v6)(15/07/2002) module loaded
Adding Swap: 400672k swap-space (priority 42)
PCI: Found IRQ 11 for device 00:0d.0
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
00:0d.0: 3Com PCI 3c905B Cyclone 100baseTx at 0x2000. Vers LK1.1.16
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 19:23:01 Oct 21 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:14.2
PCI: Sharing IRQ 11 with 00:10.0
usb-uhci.c: USB UHCI at I/O 0x2080, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
uhci.c: USB Universal Host Controller Interface driver v1.1
sg: find_free_slot ...<7>sg: initializing sg_major_array ...<4>sg: allocated major 21
sg: ... found 15:00
sg_attach: dev0=(21:0)
sg: find_free_slot ...<7>sg: ... found 15:01
sg_attach: dev1=(21:1)
sg: find_free_slot ...<7>sg: ... found 15:02
sg_attach: dev2=(21:2)
sg: find_free_slot ...<7>sg: ... found 15:03
sg_attach: dev3=(21:3)
sg: find_free_slot ...<7>sg: ... found 15:04
sg_attach: dev4=(21:4)
Attached scsi generic sg4 at scsi0, channel 0, id 5, lun 0, type 8
st: Version 20020205, bufsize 32768, wrt 30720, max init. bufs 4, s/g segs 16
Attached scsi tape st0 at scsi0, channel 0, id 1, lun 0
Attached scsi tape st1 at scsi0, channel 0, id 2, lun 0
Attached scsi tape st2 at scsi0, channel 0, id 3, lun 0
Attached scsi tape st3 at scsi0, channel 0, id 4, lun 0
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
hdc: bad special flag: 0x03
eth0: no IPv6 routers present
ide-floppy driver 0.99.newide
hdc: ATAPI 32X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
cdrom: open failed.
Linux video capture interface: v1.00
The error:
Processing /opt/tivoli/tsm/devices/bin/lb.2.4.19-4GB
Warning: loading /opt/tivoli/tsm/devices/bin/lb.2.4.19-4GB will taint the kernel: no license
See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Module lb.2.4.19-4GB loaded, with warnings
./tsmscsi: Error - insmod failed to load /opt/tivoli/tsm/devices/bin/lb.2.4.19-4GB correctly. Check that file /opt/tivoli/tsm/devices/bin/lb.conf is configured correctly.
lsmod after the error
Module Size Used by Tainted: P
lb.2.4.19-4GB 1333568 0 (unused)
videodev 5600 0 (autoclean)
ide-cd 28388 0 (autoclean)
isa-pnp 29664 0 (unused)
ipv6 139316 -1 (autoclean)
st 26924 0 (autoclean)
sr_mod 13432 0 (autoclean) (unused)
cdrom 26400 0 (autoclean) [ide-cd sr_mod]
sg 27904 0 (autoclean)
joydev 5600 0 (unused)
evdev 4352 0 (unused)
input 3168 0 [joydev evdev]
usb-uhci 21612 0 (unused)
usbcore 56832 1 [usb-uhci]
af_packet 12904 1 (autoclean)
3c59x 27088 1
lvm-mod 62976 0 (autoclean)
reiserfs 193012 1
qlogicisp 43280 0
Sorry for the length, but it's alot of data.
Attached devices:
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: Quantum Model: DLT4000 Rev: D67E
Type: Sequential-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: Quantum Model: DLT4000 Rev: D67E
Type: Sequential-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 03 Lun: 00
Vendor: Quantum Model: DLT4000 Rev: D67E
Type: Sequential-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 04 Lun: 00
Vendor: Quantum Model: DLT4000 Rev: D67E
Type: Sequential-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 05 Lun: 00
Vendor: HP Model: C1194F Rev: 1.03
Type: Medium Changer ANSI SCSI revision: 02
The HP alphbet soup C1194F translates to a 4448
lb.conf
HOST[0]=0
CHANNEL[0]=0
ID[0]=5
LUN[0]=1
mt.conf
HOST[0]=0
CHANNEL[0]=0
ID[0]=1
LUN[0]=0
HOST[1]=0
CHANNEL[1]=0
ID[1]=2
LUN[1]=0
HOST[2]=0
CHANNEL[2]=0
ID[2]=3
LUN[2]=0
HOST[3]=0
CHANNEL[3]=0
ID[3]=4
LUN[3]=0
uname -a
Linux dhcp64-253 2.4.19-4GB #1 Mon Oct 21 18:45:41 UTC 2002 i686 unknown
dmesg
Linux version 2.4.19-4GB ([email protected]) (gcc version 3.2) #1 Mon Oct 21 18:45:41 UTC 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000010000000 (usable)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
Scanning bios EBDA for MXT signature
256MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
Advanced speculative caching feature not present
On node 0 totalpages: 65536
zone(0): 4096 pages.
zone(1): 61440 pages.
zone(2): 0 pages.
ACPI disabled because your bios is from 99 and too old
You can enable it with acpi=force
Building zonelist for node : 0
Kernel command line: root=/dev/hda3 vga=788
Initializing CPU#0
Detected 398.273 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 794.62 BogoMIPS
Memory: 255372k/262144k available (1556k kernel code, 6384k reserved, 572k data, 156k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000
CPU: Common caps: 0183f9ff 00000000 00000000 00000000
CPU: Intel Pentium II (Deschutes) stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([email protected])
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20020829
ACPI: Disabled via blacklist or command line
PCI: PCI BIOS revision 2.10 entry at 0xed9a0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router PIIX [8086/7110] at 00:14.0
Limiting direct PCI/PCI transfers.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
mxt_scan_bios: enter
Starting kswapd
bigpage subsystem: allocated 0 bigpages (=0MB).
kinoded started
VFS: Diskquotas version dquot_6.5.0 initialized
aio_setup: num_physpages = 16384
aio_setup: sizeof(struct page) = 48
vesafb: framebuffer at 0x40000000, mapped to 0xd080d000, size 8192k
vesafb: mode is 800x600x16, linelength=1600, pages=7
vesafb: protected mode interface info at c000:483d
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... found (800x600, 14181 bytes).
Console: switching to colour frame buffer device 98x33
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev a1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x20a0-0x20a7, BIOS settings: hda
MA, hdbioide1: BM-DMA at 0x20a8-0x20af, BIOS settings: hdc
io, hddiohda: FUJITSU MPC3064AT, ATA DISK drive
hdc: Compaq CRD-8322B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c03a8e24, I/O limit 4095Mb (mask 0xffffffff)
hda: safely enabled flush
hda: 12594960 sectors (6449 MB), CHS=833/240/63, UDMA(33)
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2 hda3
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 16 devices)
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
ide-floppy driver 0.99.newide
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 443k freed
VFS: Mounted root (ext2 filesystem).
PCI: Found IRQ 11 for device 00:10.0
PCI: Sharing IRQ 11 with 00:14.2
scsi: limiting sg entries to 204
qlogicisp : new isp1020 revision ID (5)
scsi0 : QLogic ISP1020 SCSI on PCI bus 00 device 80 irq 11 MEM base 0xd1013000
Vendor: Quantum Model: DLT4000 Rev: D67E
Type: Sequential-Access ANSI SCSI revision: 02
Vendor: Quantum Model: DLT4000 Rev: D67E
Type: Sequential-Access ANSI SCSI revision: 02
Vendor: Quantum Model: DLT4000 Rev: D67E
Type: Sequential-Access ANSI SCSI revision: 02
Vendor: Quantum Model: DLT4000 Rev: D67E
Type: Sequential-Access ANSI SCSI revision: 02
Vendor: HP Model: C1194F Rev: 1.03
Type: Medium Changer ANSI SCSI revision: 02
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (ide0(3,3)) for (ide0(3,3))
reiserfs: replayed 3 transactions in 0 seconds
reiserfs: using ordered data mode
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 156k freed
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.5(mp-v6)(15/07/2002) module loaded
Adding Swap: 400672k swap-space (priority 42)
PCI: Found IRQ 11 for device 00:0d.0
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
00:0d.0: 3Com PCI 3c905B Cyclone 100baseTx at 0x2000. Vers LK1.1.16
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 19:23:01 Oct 21 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:14.2
PCI: Sharing IRQ 11 with 00:10.0
usb-uhci.c: USB UHCI at I/O 0x2080, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
uhci.c: USB Universal Host Controller Interface driver v1.1
sg: find_free_slot ...<7>sg: initializing sg_major_array ...<4>sg: allocated major 21
sg: ... found 15:00
sg_attach: dev0=(21:0)
sg: find_free_slot ...<7>sg: ... found 15:01
sg_attach: dev1=(21:1)
sg: find_free_slot ...<7>sg: ... found 15:02
sg_attach: dev2=(21:2)
sg: find_free_slot ...<7>sg: ... found 15:03
sg_attach: dev3=(21:3)
sg: find_free_slot ...<7>sg: ... found 15:04
sg_attach: dev4=(21:4)
Attached scsi generic sg4 at scsi0, channel 0, id 5, lun 0, type 8
st: Version 20020205, bufsize 32768, wrt 30720, max init. bufs 4, s/g segs 16
Attached scsi tape st0 at scsi0, channel 0, id 1, lun 0
Attached scsi tape st1 at scsi0, channel 0, id 2, lun 0
Attached scsi tape st2 at scsi0, channel 0, id 3, lun 0
Attached scsi tape st3 at scsi0, channel 0, id 4, lun 0
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
hdc: bad special flag: 0x03
eth0: no IPv6 routers present
ide-floppy driver 0.99.newide
hdc: ATAPI 32X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
cdrom: open failed.
Linux video capture interface: v1.00
The error:
Processing /opt/tivoli/tsm/devices/bin/lb.2.4.19-4GB
Warning: loading /opt/tivoli/tsm/devices/bin/lb.2.4.19-4GB will taint the kernel: no license
See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Module lb.2.4.19-4GB loaded, with warnings
./tsmscsi: Error - insmod failed to load /opt/tivoli/tsm/devices/bin/lb.2.4.19-4GB correctly. Check that file /opt/tivoli/tsm/devices/bin/lb.conf is configured correctly.
lsmod after the error
Module Size Used by Tainted: P
lb.2.4.19-4GB 1333568 0 (unused)
videodev 5600 0 (autoclean)
ide-cd 28388 0 (autoclean)
isa-pnp 29664 0 (unused)
ipv6 139316 -1 (autoclean)
st 26924 0 (autoclean)
sr_mod 13432 0 (autoclean) (unused)
cdrom 26400 0 (autoclean) [ide-cd sr_mod]
sg 27904 0 (autoclean)
joydev 5600 0 (unused)
evdev 4352 0 (unused)
input 3168 0 [joydev evdev]
usb-uhci 21612 0 (unused)
usbcore 56832 1 [usb-uhci]
af_packet 12904 1 (autoclean)
3c59x 27088 1
lvm-mod 62976 0 (autoclean)
reiserfs 193012 1
qlogicisp 43280 0
Sorry for the length, but it's alot of data.
