Hello TSM Admins and all,
I'm a linux admin and new to TSM, except from some notions I know very little about tape and space managament in TSM.
I have two stgpool (each in a separate VTL Lib), one is the next of the first, and have failed backup with error:
ANR2111W RECLAIM STGPOOL: There is no data to process for MCLEBS_VTL_BACK. (SESSION: 23981)
ANR2034E SELECT: No match found using this criteria. (SESSION: 23980)
ANR1086E Space reclamation is ended for volume 000363L3. There is insufficient space in storage pool. (PROCESS: 3836)
ANR1893E Process 3836 for SPACE RECLAMATION completed with a completion state of FAILURE. (PROCESS: 3836)
ANR1086E Space reclamation is ended for volume 000396L3. There is insufficient space in storage pool. (PROCESS: 3837)
ANR1893E Process 3837 for SPACE RECLAMATION completed with a completion state of FAILURE. (PROCESS: 3837)
ANR2111W RECLAIM STGPOOL: There is no data to process for MCLEBS_VTL_BACK. (SESSION: 23981)
ANR1405W Scratch volume mount request denied - no scratch volume available. (PROCESS: 3835)
ANR1086E Space reclamation is ended for volume 000130L3. There is insufficient space in storage pool. (PROCESS: 3835)
ANR1893E Process 3835 for SPACE RECLAMATION completed with a completion state of FAILURE. (PROCESS: 3835)
The primary stgpool has two empty volumes and show 0 in capacity colomun (in GUI). I couldn't do any reclamation or a move of data to the next pool. I don't know why it's not using those empty volumes!!!
I have many scratch volumes in both of the VTL used by the stgpools, the primary pool has maxscratsch volume=6 and used ones=4, the next stgpool has 20 and used 20.
I don't know how I will approach this problem. yesterday I executed a reclaim stgpool nexpool and was succesful, and thought tsm will use the next stgpool to copy dat from the primary stgpool to the next. No reclamation works in both stgpool, it fails with:
ANR2111W RECLAIM STGPOOL: There is no data to process for
mystgpool.
ANS8001I Return code 11.
Any help please? I just need hints to how I should approach this problem.
Thank you in advance,
PS: I'm using TSM 6
I'm a linux admin and new to TSM, except from some notions I know very little about tape and space managament in TSM.
I have two stgpool (each in a separate VTL Lib), one is the next of the first, and have failed backup with error:
ANR2111W RECLAIM STGPOOL: There is no data to process for MCLEBS_VTL_BACK. (SESSION: 23981)
ANR2034E SELECT: No match found using this criteria. (SESSION: 23980)
ANR1086E Space reclamation is ended for volume 000363L3. There is insufficient space in storage pool. (PROCESS: 3836)
ANR1893E Process 3836 for SPACE RECLAMATION completed with a completion state of FAILURE. (PROCESS: 3836)
ANR1086E Space reclamation is ended for volume 000396L3. There is insufficient space in storage pool. (PROCESS: 3837)
ANR1893E Process 3837 for SPACE RECLAMATION completed with a completion state of FAILURE. (PROCESS: 3837)
ANR2111W RECLAIM STGPOOL: There is no data to process for MCLEBS_VTL_BACK. (SESSION: 23981)
ANR1405W Scratch volume mount request denied - no scratch volume available. (PROCESS: 3835)
ANR1086E Space reclamation is ended for volume 000130L3. There is insufficient space in storage pool. (PROCESS: 3835)
ANR1893E Process 3835 for SPACE RECLAMATION completed with a completion state of FAILURE. (PROCESS: 3835)
The primary stgpool has two empty volumes and show 0 in capacity colomun (in GUI). I couldn't do any reclamation or a move of data to the next pool. I don't know why it's not using those empty volumes!!!
I have many scratch volumes in both of the VTL used by the stgpools, the primary pool has maxscratsch volume=6 and used ones=4, the next stgpool has 20 and used 20.
I don't know how I will approach this problem. yesterday I executed a reclaim stgpool nexpool and was succesful, and thought tsm will use the next stgpool to copy dat from the primary stgpool to the next. No reclamation works in both stgpool, it fails with:
ANR2111W RECLAIM STGPOOL: There is no data to process for
mystgpool.
ANS8001I Return code 11.
Any help please? I just need hints to how I should approach this problem.
Thank you in advance,
PS: I'm using TSM 6