Hi
I ran the verbose command and HOME1 is not listed, but I do
seem to recall that we had to run some command with NBEMMCMD to allow backups
for HOME1 to be done against the MEdia Serfer NODE03. And I think this is where
the problem is.
NODE3 still has images assigned to it. So that is why I cant
remove it. But when I tried to -deletehost HOME1, it told me volumes assigned to
host (92).
I cant find the command to remove the ALIAS name HOME1 - Im
starting to thing this is where the problem may lie.
Once I had the new HOME1 media server online, I was then going
to fully decomission NODE03 and move the images to another
server.
Simon
Try nbemmcmd -listhosts -verbose
I would expect that you would see an entry
for NODE03 with an alias or something for HOME1. You can add/change existing
entries, so I believe all you'll need to do is remove HOME1 from NODE03 and then
you can add it as a comletely new san media server. You may want to just remove
NODE03 altogether, assuming it's completely gone now. But make sure you clean up
NBU (stunits, devices, move any media to another server, etc.) before you delete
it from emm.
If you have media on
home1, you would also need to move that. Basically, you need to treat this as
decommissioning a media server (home1) and then when you add home1 back, you can
move any media back to that server if you wish.
Rusty Major, MCSE, BCFP,
VCS ▪ Sr. Storage Engineer ▪ SunGard Availability Services ▪ 757 N. Eldridge
Suite 200, Houston TX 77079 ▪ 281-584-4693 Keeping People and Information Connected® ▪ http://availability.sungard.com/ P Think before you print CONFIDENTIALITY: This e-mail (including any attachments) may
contain confidential, proprietary and privileged information, and unauthorized
disclosure or use is prohibited. If you received this e-mail in error,
please notify the sender and delete this e-mail from your system.
"WEAVER, Simon (external)"
<simon.weaver AT astrium.eads DOT net> Sent by:
<veritas-bu-bounces AT mailman.eng.auburn DOT edu>
06/08/2011 04:27 PM
|
To
| <veritas-bu AT mailman.eng.auburn DOT edu>
|
cc
|
|
Subject
| Re: [Veritas-bu] Server Not seen in
Device Config Wizard - Help please
:-( |
|
Ive had to log a call with Symantec, but its a real, real
problem :-((
The original PHYSICAL SERVER was NODE03.
The Virtual Name was HOME1 nbemmcmd -listhosts shows NODE03 but it does not show the new
Media Server HOME1
Cant add it, as it believes it
exists. Because Media is obviously assigned to NODE03 and possibly HOME1,
I think this is causing the biggest headaches!
Not even sure if I can change NODE03 to
become HOME1 or something?? Dont see anything that can help ! Simon
_____________________________________________
From: WEAVER, Simon (external) Sent: Wednesday, June 08, 2011 8:17
PM To:
veritas-bu AT mailman.eng.auburn DOT edu Subject: Server Not seen in Device Config
Wizard - Help please :-(
Hi Guys I have migrated over to new hardware, and went
to install a new SAN Media Server, and although the install is fine, no errors
and services are started, I have a problem...
When running Device Config Wizard, my
Server name is not appearing!
Originally my new SAN Media Server (Home1)
was part of a cluster. HOME1 was a virtual name. the Physical was
NODE03
When I logon to HOME1, and launch the
NetBackup Admin Console, and select the Server name I get this
message:
"The server SERVER1 is not a NetBackup
Master or Media Server. Please choose a different server"
But it is ... got the license
installed as well.
If I goto the master, type in NBEMMCMD
-listhosts it is not listed. But if I run the command.... I get this
result
nbemmcmd -addhost -machinename HOME1
-machinetype media -masterserver NBUMaster -netbackupversion 6.5.6
-operatingsystem windows
NBEMMCMD, Version:6.5.6 Host already exists in
the EMM database. Command did not complete successfully.
This used to be a VIRTUAL NAME Server
Entry for a Box that has died. A decision was taken to give the NEW Server
HOME1
I think this is part of the problem, but I
am unable to find a resolution to this !! Any ideas???
Regards
Simon
This email (including any attachments)
may contain confidential and/or privileged information or information
otherwise protected from disclosure. If you are not the intended
recipient, please notify the sender immediately, do not copy this
message or any attachments and do not use it for any purpose or
disclose its content to any person, but delete this message and any
attachments from your system. Astrium disclaims any and all liability
if this email transmission was virus corrupted, altered or
falsified. -o- Astrium Limited, Registered in England and Wales No.
2449259 Registered Office: Gunnels Wood Road, Stevenage,
Hertfordshire, SG1 2AS, England | _______________________________________________ Veritas-bu maillist
- Veritas-bu AT mailman.eng.auburn DOT edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
This email (including any attachments) may contain confidential
and/or privileged information or information otherwise protected
from disclosure. If you are not the intended recipient, please
notify the sender immediately, do not copy this message or any
attachments and do not use it for any purpose or disclose its
content to any person, but delete this message and any attachments
from your system. Astrium disclaims any and all liability if this
email transmission was virus corrupted, altered or falsified.
-o-
Astrium Limited, Registered in England and Wales No. 2449259
Registered Office:
Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England |
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|