[Veritas-bu] Netbackup training setup
2008-11-07 16:40:26
Hello,
I've got a couple of Ultra 60 sparcs and was thinking of purchasing something
like:
Sun StorEdge L280 Tape Drive DLT7000
or
Sun StorEdge L1000 DLT Tape Library w/ 2 Drives
http://sunsolve.sun.com/handbook_pub/validateUser.do?target=Systems/L1000/L1000
from Ebay obviously.
Software I would use would be Netbackup 6.5.2.
Would such a setup be usable, strictly for personal training purposes ? Just to
get more familiar with running the Netbackup's command line
commands/tools/daemons.
Any advice about this would be greatly appreciated.
Once I get this set up, I would do a write up about it, to share my experience.
Thanks
+----------------------------------------------------------------------
|This was sent by asimic AT gmail DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Veritas-bu] Netbackup training setup,
bantoi <=
|
|
|