Re: [Veritas-bu] rebuild sg after adding rob ot/drives
2008-06-18 08:46:42
What is the problem with that patch? I have it on my Solaris 10 systems
and haven't had any problems with devices, and I just configured a new
library and drives a week ago.
Jack L. Forester, Jr.
UNIX Systems Administrator, Stf
Lockheed Martin Information Technology
(304) 625-3946
-----Original Message-----
From: veritas-bu-bounces AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of
David_Lowenstein AT sd.vrtx DOT com
Sent: Tuesday, June 17, 2008 6:00 PM
To: veritas-bu AT mailman.eng.auburn DOT edu
Subject: Re: [Veritas-bu] rebuild sg after adding rob ot/drives
Okay, the problem was that I had patch 125081-16 on Solaris 10.
Patchrm'ing it and installing 125081-08 and rebooting -- -r fixed the
problem.
David_Lowenstein@
sd.vrtx.com
Sent by:
To
veritas-bu-bounce veritas-bu AT mailman.eng.auburn DOT edu
s AT mailman.eng DOT aub
cc
urn.edu
Subject
Re: [Veritas-bu] rebuild sg after
06/16/2008 05:34 adding rob ot/drives
PM
To give a little more info, I'm doing this step by step:
http://seer.entsupport.symantec.com/docs/266501.htm
Maybe I have the wrong max targets and max luns setting?
I'm assuming that since the tape drives are at c4t2d1 and c5t4d0 I won't
need anything higher than 4 targets (t4) and 2 luns (d1), But I've tried
like 15 targets and 7 luns and a bunch of other junk, just to see if it
will catch.
Again, mt sees the drives, cfgadm sees them, but sgscan -v conf all
doesn't.
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
|
|