Veritas-bu

[Veritas-bu] Needs help to configure Netbackup 5.1 to see Sun L280 tape library

2006-04-19 15:18:53
Subject: [Veritas-bu] Needs help to configure Netbackup 5.1 to see Sun L280 tape library
From: lee.logan AT lmco DOT com (Logan, Lee (N-BAE Systems))
Date: Wed, 19 Apr 2006 13:18:53 -0600
DeAnna,

I had this problem here at my site off and on for awhile.  While I could
see the robot through sya cfgadm -al, Netbackup was clueless.  For me it
ended up being a problem with the fiber.  In my case, the Controller
Card in the robot itself was flaky.  I would double check all of your
connections and controllers.

Just my 2 cents worth...... 


Lee Logan
BAE Systems Information Technology
719-277-4772
"Efforts and courage are not enough without purpose and direction."  


-----Original Message-----
From: veritas-bu-admin AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu] On Behalf Of
DeAnna_nguyen AT comcast DOT net
Sent: Wednesday, April 19, 2006 12:32 PM
To: Paul Keating; veritas-bu AT mailman.eng.auburn DOT edu
Subject: RE: [Veritas-bu] Needs help to configure Netbackup 5.1 to see
Sun L280 tape library

Paul,

L280 is connecting backup server.

Thanks,

De-
 -------------- Original message ----------------------
From: "Paul Keating" <pkeating AT bank-banque-canada DOT ca>
> Is the robot connected to the netbackup server or to your NDMP host?
> 
> Paul
> 
> --
> 
> 
> > -----Original Message-----
> > From: veritas-bu-admin AT mailman.eng.auburn DOT edu
> > [mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu] On Behalf Of 
> > DeAnna_nguyen AT comcast DOT net
> > Sent: April 19, 2006 2:08 PM
> > To: veritas-bu AT mailman.eng.auburn DOT edu
> > Subject: [Veritas-bu] Needs help to configure Netbackup 5.1 to see 
> > Sun L280 tape library
> > 
> > 
> > Hello Netbackup gurus,
> > 
> > I am new with Netbackup, thus I need your help if you can.
> > 
> > First:
> > 
> > Server Sun ultra 60.
> > OS: Solaris 8 patch upto date.
> > 
> > Veritas Software: Netbackup 5.1 MP3 + NDMP three ways backup. 
> > I have only one server. Which is: Master + Media
> > 
> > Here is what I don't know.
> > 
> > I can run robtest and can move tape in and out drive, but can't get 
> > netbackup to see a robot.
> > 
> > Here is the error from the /var/adm/messages:
> > 
> > "tsdd[10657]: [ID 100463 daemon.error] TSD(1) unavailable: 
> > initialization failed: Unable to sense robotic device Apr 19 
> > 07:42:49 netbackup tsdd[10859]: [ID 271271 daemon.error] TSD(1) 
> > [10657] Mode_sense error Apr 19 07:42:49 netbackup tsdd[10859]: [ID 
> > 290852 daemon.error] TSD(1) key 5h, ASC 24h, ASCQ 0h, INVALID FIELD 
> > IN CDB Apr 19 07:42:49 netbackup tsdd[10657]: [ID 100463 
> > daemon.error] TSD(1) unavailable: initialization failed:
> > Unable to sense robotic device
> > Apr 19 07:44:51 netbackup tsdd[10868]: [ID 271271 daemon.error] 
> > TSD(1) [10657] Mode_sense error Apr 19 07:44:51 netbackup 
> > tsdd[10868]: [ID 290852 daemon.error] TSD(1) key 5h, ASC 24h, ASCQ 
> > 0h, INVALID FIELD IN CDB Apr 19 07:44:51 netbackup tsdd[10657]: [ID 
> > 100463 daemon.error] TSD(1) unavailable: initialization failed:
> > Unable to sense robotic device
> > Apr 19 07:46:53 netbackup tsdd[10881]: [ID 271271 daemon.error] 
> > TSD(1) [10657] Mode_sense error Apr 19 07:46:53 netbackup 
> > tsdd[10881]: [ID 290852 daemon.error] TSD(1) key 5h, ASC 24h, ASCQ 
> > 0h, INVALID FIELD IN CDB Apr 19 07:46:53 netbackup tsdd[10657]: [ID 
> > 100463 daemon.error] TSD(1) unavailable: initialization failed:
> > Unable to sense robotic device
> > Apr 19 07:47:50 netbackup tsdd[10657]: [ID 271271 daemon.error] 
> > TSD(1) [10657] Mode_sense error Apr 19 07:47:50 netbackup 
> > tsdd[10657]: [ID 290852 daemon.error] TSD(1) key 5h, ASC 24h, ASCQ 
> > 0h, INVALID FIELD IN CDB "
> > 
> > And I ran ./tpautoconf -report_disc
> > 
> > ======================= Missing Device (Drive) 
> > =======================  Drive Name = ndmpdr  Drive Path = 
> > /ndmp//dev/rmt/0cbn  Inquiry = "-"
> >  Serial Number =
> >  TSD(1) definition Drive = 1
> >  Hosts configured for this device:
> >   Host = netbackup02
> > ======================= New Device (Tape) =======================
> >  Inquiry = "QUANTUM DLT7000         2150"
> >  Serial Number = CX917S3450
> >  Drive Path = /dev/rmt/0cbn
> >  Found as TSD(1), Drive = 1
> > 
> > So can some one give me an advice how to get this work?
> > 
> > Thanks,
> > 
> > De-
> > _______________________________________________
> > Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu 
> > http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
> > 





<Prev in Thread] Current Thread [Next in Thread>