Lee,
I will do as your sugestions. I will replace cable first, then SCSI card after.
I just want to see is it cable cause problem or card or none of the above.
Anyway, thank you for your time.
De-
-------------- Original message ----------------------
From: "Logan, Lee (N-BAE Systems)" <lee.logan AT lmco DOT com>
> DeAnna,
>
> I had this problem here at my site off and on for awhile. While I could
> see the robot through sya cfgadm -al, Netbackup was clueless. For me it
> ended up being a problem with the fiber. In my case, the Controller
> Card in the robot itself was flaky. I would double check all of your
> connections and controllers.
>
> Just my 2 cents worth......
>
>
> Lee Logan
> BAE Systems Information Technology
> 719-277-4772
> "Efforts and courage are not enough without purpose and direction."
>
>
> -----Original Message-----
> From: veritas-bu-admin AT mailman.eng.auburn DOT edu
> [mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu] On Behalf Of
> DeAnna_nguyen AT comcast DOT net
> Sent: Wednesday, April 19, 2006 12:32 PM
> To: Paul Keating; veritas-bu AT mailman.eng.auburn DOT edu
> Subject: RE: [Veritas-bu] Needs help to configure Netbackup 5.1 to see
> Sun L280 tape library
>
> Paul,
>
> L280 is connecting backup server.
>
> Thanks,
>
> De-
> -------------- Original message ----------------------
> From: "Paul Keating" <pkeating AT bank-banque-canada DOT ca>
> > Is the robot connected to the netbackup server or to your NDMP host?
> >
> > Paul
> >
> > --
> >
> >
> > > -----Original Message-----
> > > From: veritas-bu-admin AT mailman.eng.auburn DOT edu
> > > [mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu] On Behalf Of
> > > DeAnna_nguyen AT comcast DOT net
> > > Sent: April 19, 2006 2:08 PM
> > > To: veritas-bu AT mailman.eng.auburn DOT edu
> > > Subject: [Veritas-bu] Needs help to configure Netbackup 5.1 to see
> > > Sun L280 tape library
> > >
> > >
> > > Hello Netbackup gurus,
> > >
> > > I am new with Netbackup, thus I need your help if you can.
> > >
> > > First:
> > >
> > > Server Sun ultra 60.
> > > OS: Solaris 8 patch upto date.
> > >
> > > Veritas Software: Netbackup 5.1 MP3 + NDMP three ways backup.
> > > I have only one server. Which is: Master + Media
> > >
> > > Here is what I don't know.
> > >
> > > I can run robtest and can move tape in and out drive, but can't get
> > > netbackup to see a robot.
> > >
> > > Here is the error from the /var/adm/messages:
> > >
> > > "tsdd[10657]: [ID 100463 daemon.error] TSD(1) unavailable:
> > > initialization failed: Unable to sense robotic device Apr 19
> > > 07:42:49 netbackup tsdd[10859]: [ID 271271 daemon.error] TSD(1)
> > > [10657] Mode_sense error Apr 19 07:42:49 netbackup tsdd[10859]: [ID
> > > 290852 daemon.error] TSD(1) key 5h, ASC 24h, ASCQ 0h, INVALID FIELD
> > > IN CDB Apr 19 07:42:49 netbackup tsdd[10657]: [ID 100463
> > > daemon.error] TSD(1) unavailable: initialization failed:
> > > Unable to sense robotic device
> > > Apr 19 07:44:51 netbackup tsdd[10868]: [ID 271271 daemon.error]
> > > TSD(1) [10657] Mode_sense error Apr 19 07:44:51 netbackup
> > > tsdd[10868]: [ID 290852 daemon.error] TSD(1) key 5h, ASC 24h, ASCQ
> > > 0h, INVALID FIELD IN CDB Apr 19 07:44:51 netbackup tsdd[10657]: [ID
> > > 100463 daemon.error] TSD(1) unavailable: initialization failed:
> > > Unable to sense robotic device
> > > Apr 19 07:46:53 netbackup tsdd[10881]: [ID 271271 daemon.error]
> > > TSD(1) [10657] Mode_sense error Apr 19 07:46:53 netbackup
> > > tsdd[10881]: [ID 290852 daemon.error] TSD(1) key 5h, ASC 24h, ASCQ
> > > 0h, INVALID FIELD IN CDB Apr 19 07:46:53 netbackup tsdd[10657]: [ID
> > > 100463 daemon.error] TSD(1) unavailable: initialization failed:
> > > Unable to sense robotic device
> > > Apr 19 07:47:50 netbackup tsdd[10657]: [ID 271271 daemon.error]
> > > TSD(1) [10657] Mode_sense error Apr 19 07:47:50 netbackup
> > > tsdd[10657]: [ID 290852 daemon.error] TSD(1) key 5h, ASC 24h, ASCQ
> > > 0h, INVALID FIELD IN CDB "
> > >
> > > And I ran ./tpautoconf -report_disc
> > >
> > > ======================= Missing Device (Drive)
> > > ======================= Drive Name = ndmpdr Drive Path =
> > > /ndmp//dev/rmt/0cbn Inquiry = "-"
> > > Serial Number =
> > > TSD(1) definition Drive = 1
> > > Hosts configured for this device:
> > > Host = netbackup02
> > > ======================= New Device (Tape) =======================
> > > Inquiry = "QUANTUM DLT7000 2150"
> > > Serial Number = CX917S3450
> > > Drive Path = /dev/rmt/0cbn
> > > Found as TSD(1), Drive = 1
> > >
> > > So can some one give me an advice how to get this work?
> > >
> > > Thanks,
> > >
> > > De-
> > > _______________________________________________
> > > Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
> > > http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
> > >
>
>
>
>
> _______________________________________________
> Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|