[Veritas-bu] Barcode rules for LTO1/LTO2
2005-10-26 11:07:02
The trick is to start each new tape type at a nice boundary on your
labeling. I've got mixed LTO1 & LTO2 and my barcode rules look like this:
> vmrule -listall -b
barcode media volume max mounts/
tag type pool cleanings description
----------------------------------------------------------------------------
--
CLN HC_CLN None 50 HCART Cleaning Tape
001 HCART Scratch 0 hcart
002 HCART Scratch 0 hcart
003 HCART Scratch 0 hcart
0040 HCART Scratch 0 hcart
0041 HCART Scratch 0 hcart
0042 HCART Scratch 0 hcart
0043 HCART Scratch 0 hcart
0044 HCART2 Scratch 0 hcart2
0045 HCART2 Scratch 0 hcart2
0046 HCART2 Scratch 0 hcart2
0047 HCART2 Scratch 0 hcart2
0048 HCART2 Scratch 0 hcart2
0049 HCART2 Scratch 0 hcart2
<DEFAULT> HCART2 Scratch 0 hcart2
As you can see, my HCART tapes number 001xxx to 0043xx, my HCART2 tapes
start at 0045xx and go up.
It would have been easier to start the new taps at a nice 1000's boundary
but we didn't think ahead.
The next trick is to get each assigned to the appropriate volume group. The
rules say an individual volume group can't mix media types.
-M
-----Original Message-----
From: veritas-bu-admin AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu]On Behalf Of
ida3248b AT post.cybercity DOT dk
Sent: Wednesday, October 26, 2005 5:41 AM
To: veritas-bu AT mailman.eng.auburn DOT edu
Subject: [Veritas-bu] Barcode rules for LTO1/LTO2
Hello
We have a setup with a mix of LTO1 (Label ends with L1) as hcart and LTO
(Label ends with L2) as hcart2, soon we will also have LTO3 (Label
presumably
ends with L3)
Has somebody a way to make barcode rules so new tapes get the right tape
type ?
Regards
Michael
--
Cybercity Webhosting (http://www.cybercity.dk)
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
|
|