Thanks, but unfortunately it's a system  I have 
inherited so I don't have this option.

Regards
Michael

On Wed, 26 Oct 2005 09:07:02 -0600, Mark.Donaldson wrote
> The trick is to start each new tape type at a nice boundary on your
> labeling.  I've got mixed LTO1 & LTO2 and my barcode rules look like 
> this:
> 
> > vmrule -listall -b
> barcode          media    volume         max mounts/
> tag              type     pool             cleanings description
> ----------------------------------------------------------------------------
> --
> CLN              HC_CLN   None                    50 HCART Cleaning Tape
> 001              HCART    Scratch                  0 hcart
> 002              HCART    Scratch                  0 hcart
> 003              HCART    Scratch                  0 hcart
> 0040             HCART    Scratch                  0 hcart
> 0041             HCART    Scratch                  0 hcart
> 0042             HCART    Scratch                  0 hcart
> 0043             HCART    Scratch                  0 hcart
> 0044             HCART2   Scratch                  0 hcart2
> 0045             HCART2   Scratch                  0 hcart2
> 0046             HCART2   Scratch                  0 hcart2
> 0047             HCART2   Scratch                  0 hcart2
> 0048             HCART2   Scratch                  0 hcart2
> 0049             HCART2   Scratch                  0 hcart2
> <DEFAULT>        HCART2   Scratch                  0 hcart2
> 
> As you can see, my HCART tapes number 001xxx to 0043xx, my HCART2 tapes
> start at 0045xx and go up.
> 
> It would have been easier to start the new taps at a nice 1000's boundary
> but we didn't think ahead.
> 
> The next trick is to get each assigned to the appropriate volume 
> group.  The rules say an individual volume group can't mix media types.
> 
> -M
> 
> -----Original Message-----
> From: veritas-bu-admin AT mailman.eng.auburn DOT edu
> [mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu]On Behalf Of
> ida3248b AT post.cybercity DOT dk
> Sent: Wednesday, October 26, 2005 5:41 AM
> To: veritas-bu AT mailman.eng.auburn DOT edu
> Subject: [Veritas-bu] Barcode rules for LTO1/LTO2
> 
> Hello
> 
> We have a setup with a mix of LTO1 (Label ends with L1) as hcart and 
> LTO 
> (Label ends with L2) as hcart2, soon we will also have LTO3 (Label 
> presumably ends with L3)
> 
> Has somebody a way to make barcode rules so new tapes get the right 
> tape type ?
> 
> Regards
> Michael
> 
> --
> Cybercity Webhosting (http://www.cybercity.dk)
> 
> _______________________________________________
> Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


--
Cybercity Webhosting (http://www.cybercity.dk)