This is a multi-part message in MIME format.
------_=_NextPart_001_01C5A349.E29264EF
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
The machine: A Sun V440 running Solaris 8.
Note: There is no switch involved.
=20
DRIVE1 <-> HBA1 PORT 1
DRIVE2 <-> HBA1 PORT 2
DRIVE3 <-> HBA2 PORT 1
DRIVE4 <-> HBA2 PORT 2
=20
=20
My old configuration:
=20
Using JNI-1063 & JNI-6410 cards, I plug four LTO2 drives directly into
three JNI-1063 cards and one JNI-6410 card.
=20
=20
My new configuration:
=20
Two 2300 (2342) based cards dual port gigabit Ethernet.
=20
=20
I removed the old drivers and installed the QL2300 driver, the QL2300
driver is one of three drivers. The Sun QLC and QLCX drivers are
included in Solaris 8.
=20
=20
In my dmesg, I clearly see the devices available, as shown below:
=20
Aug 17 14:01:07 backup01 scsi: [ID 365881 kern.info]
/pci@1d,700000/SUNW,qlc@2/fp@0,0/st@w50060b00002047f0,0 (st60):
Aug 17 14:01:07 backup01 <HP Ultrium LTO 2>
Aug 17 14:01:07 backup01 scsi: [ID 799468 kern.info] st60 at fp0: name
w50060b00002047f0,0, bus address 55
Aug 17 14:01:07 backup01 genunix: [ID 936769 kern.info] st60 is
/pci@1d,700000/SUNW,qlc@2/fp@0,0/st@w50060b00002047f0,0
Aug 17 14:01:07 backup01 genunix: [ID 408114 kern.info]
/pci@1d,700000/SUNW,qlc@2/fp@0,0/st@w50060b00002047f0,0 (st60) online
Aug 17 14:01:07 backup01 scsi: [ID 365881 kern.info]
/pci@1d,700000/SUNW,qlc@2,1/fp@0,0/st@w50060b000020905c,0 (st61):
Aug 17 14:01:07 backup01 <HP Ultrium LTO 2>
Aug 17 14:01:07 backup01 scsi: [ID 799468 kern.info] st61 at fp1: name
w50060b000020905c,0, bus address 55
Aug 17 14:01:07 backup01 genunix: [ID 936769 kern.info] st61 is
/pci@1d,700000/SUNW,qlc@2,1/fp@0,0/st@w50060b000020905c,0
Aug 17 14:01:07 backup01 genunix: [ID 408114 kern.info]
/pci@1d,700000/SUNW,qlc@2,1/fp@0,0/st@w50060b000020905c,0 (st61) online
Aug 17 14:01:07 backup01 scsi: [ID 365881 kern.info]
/pci@1e,600000/SUNW,qlc@4/fp@0,0/st@w50060b0000213e20,0 (st62):
Aug 17 14:01:07 backup01 <HP Ultrium LTO 2>
Aug 17 14:01:07 backup01 scsi: [ID 799468 kern.info] st62 at fp2: name
w50060b0000213e20,0, bus address 55
Aug 17 14:01:07 backup01 genunix: [ID 936769 kern.info] st62 is
/pci@1e,600000/SUNW,qlc@4/fp@0,0/st@w50060b0000213e20,0
Aug 17 14:01:07 backup01 genunix: [ID 408114 kern.info]
/pci@1e,600000/SUNW,qlc@4/fp@0,0/st@w50060b0000213e20,0 (st62) online
Aug 17 14:01:07 backup01 scsi: [ID 365881 kern.info]
/pci@1e,600000/SUNW,qlc@4,1/fp@0,0/st@w50060b0000209064,0 (st63):
Aug 17 14:01:07 backup01 <HP Ultrium LTO 2>
Aug 17 14:01:07 backup01 scsi: [ID 799468 kern.info] st63 at fp3: name
w50060b0000209064,0, bus address 55
Aug 17 14:01:07 backup01 genunix: [ID 936769 kern.info] st63 is
/pci@1e,600000/SUNW,qlc@4,1/fp@0,0/st@w50060b0000209064,0
Aug 17 14:01:07 backup01 genunix: [ID 408114 kern.info]
/pci@1e,600000/SUNW,qlc@4,1/fp@0,0/st@w50060b0000209064,0 (st63) online
=20
=20
=20
Could it be possible my binding is incorrect for the QLogic HBAs?
=20
The problem is, with the sgscan utility, it does not find the drives on
st60, st61, st62, st63.
=20
I ran the sg.install command and re-created the
/kernel/driver/{st.conf,sg.conf} etc files but every time I run sgscan
it does not detect the drives.
=20
Has anyone run into a similar problem or issue before?
=20
In the meantime, I am doing further research to determine the root cause
of the problem, I have put the 1063's and 6410 back in the server and
did a reboot reconfigure and all devices appear without a problem.
There is something to do with the sg.install, the
/kernel/drv/{sg.conf,st.conf} files that I have not quite figured out
yet.
=20
My goal is to have it only probe for the devices that exist.
I have attached all of the configuration files to this e-mail that
concern the tape and scsi information from /kernel/drv.
In the end, it is probably something trivial, but at this time I cannot
seem to spot it.
=20
Qlc/qla2300 - (this config works and it sees the drives just fine, BUT I
cannot see them with sgscan).
Yes I have done the sg.install commands but did not have any luck.
Any help would be greatly appreciated.
=20
=20
Thanks,
Justin.
=20
=20
------_=_NextPart_001_01C5A349.E29264EF
Content-Type: text/html;
charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
<html xmlns:o=3D"urn:schemas-microsoft-com:office:office" =
xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
xmlns=3D"http://www.w3.org/TR/REC-html40">
<head>
<meta http-equiv=3DContent-Type content=3D"text/html; =
charset=3Dus-ascii">
<meta name=3DGenerator content=3D"Microsoft Word 11 (filtered medium)">
<style>
<!--
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman";}
a:link, span.MsoHyperlink
{color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{color:purple;
text-decoration:underline;}
span.EmailStyle17
{mso-style-type:personal;
font-family:Arial;
color:windowtext;}
span.EmailStyle18
{mso-style-type:personal-reply;
font-family:Arial;
color:navy;}
@page Section1
{size:8.5in 11.0in;
margin:1.0in 1.25in 1.0in 1.25in;}
div.Section1
{page:Section1;}
-->
</style>
</head>
<body lang=3DEN-US link=3Dblue vlink=3Dpurple>
<div class=3DSection1>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>The machine: A Sun V440 running Solaris =
8.<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>Note: There is no switch =
involved.<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'><o:p> </o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>DRIVE1 <-> HBA1 PORT =
1<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>DRIVE2 <-> HBA1 PORT =
2<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>DRIVE3 <-> HBA2 PORT =
1<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>DRIVE4 <-> HBA2 PORT =
2<o:p></o:p></span></font></p>
<div style=3D'border:none;border-bottom:solid windowtext =
1.0pt;padding:0in 0in 1.0pt 0in'>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'><o:p> </o:p></span></font></p>
</div>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'><o:p> </o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>My old configuration:<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'><o:p> </o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>Using JNI-1063 & JNI-6410 cards, I plug four LTO2 =
drives
directly into three JNI-1063 cards and one JNI-6410 =
card.<o:p></o:p></span></font></p>
<div style=3D'border:none;border-bottom:solid windowtext =
1.0pt;padding:0in 0in 1.0pt 0in'>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'><o:p> </o:p></span></font></p>
</div>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'><o:p> </o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>My new configuration:<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'><o:p> </o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>Two 2300 (2342) based cards dual port gigabit =
Ethernet.<o:p></o:p></span></font></p>
<div style=3D'border:none;border-bottom:solid windowtext =
1.0pt;padding:0in 0in 1.0pt 0in'>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'><o:p> </o:p></span></font></p>
</div>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'><o:p> </o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>I removed the old drivers and installed the QL2300 =
driver, the
QL2300 driver is one of three drivers. The Sun QLC and QLCX =
drivers are
included in Solaris 8.<o:p></o:p></span></font></p>
<div style=3D'border:none;border-bottom:solid windowtext =
1.0pt;padding:0in 0in 1.0pt 0in'>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'><o:p> </o:p></span></font></p>
</div>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'><o:p> </o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>In my dmesg, I clearly see the devices available, as =
shown
below:<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'><o:p> </o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>Aug 17 14:01:07 backup01 scsi: [ID 365881 kern.info]
/pci@1d,700000/SUNW,qlc@2/fp@0,0/st@w50060b00002047f0,0 =
(st60):<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>Aug 17 14:01:07
backup01 <HP Ultrium LTO =
2><o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>Aug 17 14:01:07 backup01 scsi: [ID 799468 kern.info] =
st60 at
fp0: name w50060b00002047f0,0, bus address =
55<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>Aug 17 14:01:07 backup01 genunix: [ID 936769 =
kern.info] st60
is =
/pci@1d,700000/SUNW,qlc@2/fp@0,0/st@w50060b00002047f0,0<o:p></o:p></span>=
</font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>Aug 17 14:01:07 backup01 genunix: [ID 408114 =
kern.info]
/pci@1d,700000/SUNW,qlc@2/fp@0,0/st@w50060b00002047f0,0 (st60) =
online<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>Aug 17 14:01:07 backup01 scsi: [ID 365881 kern.info]
/pci@1d,700000/SUNW,qlc@2,1/fp@0,0/st@w50060b000020905c,0 =
(st61):<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>Aug 17 14:01:07
backup01 <HP Ultrium LTO =
2><o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>Aug 17 14:01:07 backup01 scsi: [ID 799468 kern.info] =
st61 at
fp1: name w50060b000020905c,0, bus address =
55<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>Aug 17 14:01:07 backup01 genunix: [ID 936769 =
kern.info] st61
is =
/pci@1d,700000/SUNW,qlc@2,1/fp@0,0/st@w50060b000020905c,0<o:p></o:p></spa=
n></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>Aug 17 14:01:07 backup01 genunix: [ID 408114 =
kern.info]
/pci@1d,700000/SUNW,qlc@2,1/fp@0,0/st@w50060b000020905c,0 (st61) =
online<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>Aug 17 14:01:07 backup01 scsi: [ID 365881 kern.info]
/pci@1e,600000/SUNW,qlc@4/fp@0,0/st@w50060b0000213e20,0 =
(st62):<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>Aug 17 14:01:07
backup01 <HP Ultrium LTO =
2><o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>Aug 17 14:01:07 backup01 scsi: [ID 799468 kern.info] =
st62 at
fp2: name w50060b0000213e20,0, bus address =
55<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>Aug 17 14:01:07 backup01 genunix: [ID 936769 =
kern.info] st62
is =
/pci@1e,600000/SUNW,qlc@4/fp@0,0/st@w50060b0000213e20,0<o:p></o:p></span>=
</font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>Aug 17 14:01:07 backup01 genunix: [ID 408114 =
kern.info]
/pci@1e,600000/SUNW,qlc@4/fp@0,0/st@w50060b0000213e20,0 (st62) =
online<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>Aug 17 14:01:07 backup01 scsi: [ID 365881 kern.info] =
/pci@1e,600000/SUNW,qlc@4,1/fp@0,0/st@w50060b0000209064,0
(st63):<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>Aug 17 14:01:07
backup01 <HP Ultrium LTO =
2><o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>Aug 17 14:01:07 backup01 scsi: [ID 799468 kern.info] =
st63 at
fp3: name w50060b0000209064,0, bus address =
55<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>Aug 17 14:01:07 backup01 genunix: [ID 936769 =
kern.info] st63
is =
/pci@1e,600000/SUNW,qlc@4,1/fp@0,0/st@w50060b0000209064,0<o:p></o:p></spa=
n></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>Aug 17 14:01:07 backup01 genunix: [ID 408114 =
kern.info]
/pci@1e,600000/SUNW,qlc@4,1/fp@0,0/st@w50060b0000209064,0 (st63) =
online<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'><o:p> </o:p></span></font></p>
<div style=3D'border:none;border-bottom:solid windowtext =
1.0pt;padding:0in 0in 1.0pt 0in'>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'><o:p> </o:p></span></font></p>
</div>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'><o:p> </o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>Could it be possible my binding is incorrect for the =
QLogic
HBAs?<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'><o:p> </o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>The problem is, with the sgscan utility, it does not =
find
the drives on st60, st61, st62, st63.<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'><o:p> </o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>I ran the sg.install command and re-created the
/kernel/driver/{st.conf,sg.conf} etc files but every time I run sgscan =
it does
not detect the drives.<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'><o:p> </o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>Has anyone run into a similar problem or issue =
before?<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'><o:p> </o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>In the meantime, I am doing further research to =
determine
the root cause of the problem, I have put the 1063’s and 6410 back =
in the
server and did a reboot reconfigure and all devices appear without a
problem. There is something to do with the sg.install, the
/kernel/drv/{sg.conf,st.conf} files that I have not quite figured out =
yet.<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'><o:p> </o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>My goal is to have it only probe for the devices that =
exist.<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>I have attached all of the configuration files to =
this
e-mail that concern the tape and scsi information from =
/kernel/drv.<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>In the end, it is probably something trivial, but at =
this
time I cannot seem to spot it.<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'><o:p> </o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>Qlc/qla2300 – (this config works and it sees =
the
drives just fine, BUT I cannot see them with =
sgscan).<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>Yes I have done the sg.install commands but did not =
have any
luck.<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>Any help would be greatly =
appreciated.<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'><o:p> </o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'><o:p> </o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>Thanks,<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'><br>
Justin.<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'><o:p> </o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'><o:p> </o:p></span></font></p>
</div>
</body>
</html>
------_=_NextPart_001_01C5A349.E29264EF--
|