2nd field of the "FRAG" lines.

-M

-----Original Message-----
From: veritas-bu-admin AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu]On Behalf Of Dean
Sent: Wednesday, December 29, 2004 6:50 PM
To: dave.markham AT fjserv DOT net
Cc: veritas-bu AT mailman.eng.auburn DOT edu
Subject: Re: [Veritas-bu] identifing tapes used for duplication


What Jason said about setting up a seperate pool for duplicates is the
easiest.

But if you can't do that, you can use bpimagelist -l and I think the
2nd or 3rd field is the copy number.


On Wed, 29 Dec 2004 15:49:16 +0000, Dave Markham
<dave.markham AT fjserv DOT net> wrote:
> I have just done a new install for a customer and now use media managers
> and other things i have not used before.
> 
> I have a standard script which identifies tapes written per a variable
> schedule so many hours ago.
> This is fine for working out which are weekly full tapes etc, but i have
> now had to implement a tape duplicating system.
> 
> I have got bpduplicate working and am going to launch it from
> sessions_notify or from cron and wait for jobs to finish. The problem is
> i then need to automatically identify the tapes bpduplicate wrote TO so
> ops can remove them in the morning.
> 
> Any ideas?
> 
> Dave
> _______________________________________________
> Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
>
_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu