Hello fellows,
I have a question regarding configuration which would allow to use LTO media
in LTO2 drive. I have two LTO2 drives in STK 180 library configured on
NetBackup Server as HCART2 drives. Appropriate storage unit is created,
again, as a HCART2 storage unit. Originally, we created barcode rules which
would allow as to import new, LTO2 media as HCART2 and old LTO media as
HCART. Of course storage unit refused to accept HCART media for a backup.
Step two was to create second storage unit as HCART pointing to the same
library and drives, and direct backups into that unit. Backup failed with
error 219, storage unit is not available, however both drives were available
for use. I guess my question is if somebody has an experience in configuring
NetBackup to accept lower density media in higher density drives and how it
was done. Another thing I would like to try is to import LTO (HCART) media
as HCART2 media, changing our barcode rule. But I am concern that NetBackup
would utilize it appropriate and write/read from tape without errors.
Backup environment is NetBackup 4.5 (no patches) on Windows 2000 server and
L180 with LTO Gen2 fibre drives.
Thanks in advance. Any suggestion is greatly appreciated.
Cheers,
Gueorgui (George) Lavrov, MCSE, SNIA FC-SAN-P
Data Storage Specialist
Seven Group Inc.
Ph: 604.484.4977 ext.115
Cell: 604.781.7701
Email: George AT sevengroup DOT ca
http://www.sevengroup.ca
Data Management with Integrity
|