[Veritas-bu] configuring ACS with NBU 4.5 on W2K
2003-01-07 17:42:08
Subject: |
[Veritas-bu] configuring ACS with NBU 4.5 on W2K |
From: |
Keith Michaels <krm AT sdc.cs.boeing DOT com> (Keith Michaels) |
Date: |
Tue, 7 Jan 2003 14:42:08 -0800 (PST) |
This must be the problem. I just installed the NBU CD. Is LibAttach
on there? Or do we download it from STK? I just figured the install
wizard would do everything...
Thank you both for the tip,
-Keith
>
> Did you install LibAttach? You need it on the Windows Media server. It is
> software supplied by STK which allows Windows machines to talk to ACSLS.
>
> -mike
>
> -----Original Message-----
> From: Keith Michaels
> To: veritas-bu AT mailman.eng.auburn DOT edu
> Sent: 1/7/03 3:27 PM
> Subject: [Veritas-bu] configuring ACS with NBU 4.5 on W2K
>
> I think this is an obvious problem but I just can't figure it out.
>
> Just installed NBU 4.5 on Windows 2000/SP2 using 2 STK 9840's and a
> STK Powderhorn silo. ACS server is Solaris 8 running ACSLS 6.0.1.
> No errors installing. Configuring robots and drives went fine.
>
> But it won't mount any tapes. The ACSLS server receives nothing.
> The PC event log shows the following:
>
> "Robot ACS(0) is not active on this machine"
>
> How do I "activate" ACS(0)? Is there a step I missed??
>
> -Keith
>
> _______________________________________________
> Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
|
|