Sv: [Veritas-bu] Emulex LP 8000 drivers for Netbackup 3.4.1
2002-09-12 11:41:20
Subject: |
Sv: [Veritas-bu] Emulex LP 8000 drivers for Netbackup 3.4.1 |
From: |
ida3248b AT post.cybercity DOT dk (Michael Graff Andersen) |
Date: |
Thu, 12 Sep 2002 17:41:20 +0200 |
Hi Patrick
I have had simlar problems on an AIX with a IBM FC 6228 (EOM of Emulex),
in our case it was because the HBA wsa using SCSI-3 and our tape drive SCSI.
Try look in the event log for unable to SCSI unload.
Regards
MIchael
NBUSCRIPTS
http://mian.homepage.dk
-----Oprindelig meddelelse-----
Fra: Wilhelm, Patrick <pawilhelm AT davidson DOT edu>
Til: veritas-bu AT mailman.eng.auburn DOT edu <veritas-bu AT mailman.eng.auburn
DOT edu>
Dato: 12. september 2002 17:24
Emne: [Veritas-bu] Emulex LP 8000 drivers for Netbackup 3.4.1
>We've recently rev'd up our drivers for our Emulex LP8000 HBAs on a Dell 2550
>(W2K) to 2.11a2, and have experienced problems with NB, with the server never
>recognizing that the drive is loaded. Because NB never gets notification, it
>assumes the drive is unavailable, and downs it.
>
>We utilize SSO with four SAN attached LTO drives in an L700 tape library. Has
>anyone else experienced this type problem?
>
>Or does anyone know of a different driver or config. trick to get around this
>problem?
>
>
>Patrick Wilhelm
>Davidson College - ITS
>704-894-2569
>pawilhelm AT davidson DOT edu
>
>
>_______________________________________________
>Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
>http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
>
|
|
|