[Veritas-bu] alternative method for moving volumes?
2001-01-29 15:49:13
Subject: |
[Veritas-bu] alternative method for moving volumes? |
From: |
David A. Chapa david AT datastaff DOT com |
Date: |
Mon, 29 Jan 2001 12:49:13 -0800 (PST) |
That actually will only change the volume group not the
residence of the media.
you'll still use vmchange.
vmchange -res -m $mediaid -mt $mtype -rt none -v $new_v
with this you can actually move it from the robotic
device logically and change its volume group.
David
Quoting fx [François-Xavier Peretmere]
<fx AT veritas DOT com>:
> > From: John Meyers [mailto:john.meyers AT wright DOT edu]
> > Sent: Monday 29 January, 2001 17:03
>
> > I'm just getting started with NetBackup 3.2GA on a
Solaris 2.6 server,
> > and I'm wondering if there is a command line
method of moving volumes
> > from a robot device to standalone (logically).
The only documented
> > procedure I could find was via the media manager
interface.
>
> check /usr/openv/volmgr/bin/vmchange command.
>
> something like
>
> # vmchange -M $master -new_v $outside_vg -m $tape
>
> will do the trick. there's too a "not documented but
widely used"
> switch to eject the media, -e.
>
> fx
>
> #include <std_disclaimer.h>
>
> --
> fx AT veritas DOT com | The ten thousand things.
> François-Xavier Peretmere | How long do any persist?
> http://www.veritas.com/ | Netscape, too, has gone.
>
> _______________________________________________
> Veritas-bu maillist - Veritas-
bu AT mailman.eng.auburn DOT edu
>
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-
bu
>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
David A. Chapa
Consulting Manager
DataStaff, Inc.
847 413 1144
|
|
|