Networker

Re: [Networker] Linux Tape Drive Re-Ordering Issue

2010-11-09 12:30:23
Subject: Re: [Networker] Linux Tape Drive Re-Ordering Issue
From: Len Philpot <Len.Philpot AT CLECO DOT COM>
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Date: Tue, 9 Nov 2010 11:29:28 -0600
> Davis, Raymond P 
> 
> You nailed it  Frank. 
> 
> I have a meeting tomorrow with my Networker DSE and will show him this
> email. My Linux guy also says this is coming from Networker as it is not
> handling bad drives very well when it puts them in service mode.
> 
> 
> Raymond Davis
>
> Behalf Of Francis Swasey
> 
> Hi Jee,
> 
> Sadly, it has everything to do with NetWorker these days.  Starting with
> 7.5 NetWorker now records the serial numbers from the drives in the
> jukebox and if it finds a mismatch (as it will after you physically
> replace a drive that has worn out), it refuses to use that drive.
> 
> You have to perform a scan for new devices from the NMC on the system
> that sees the robotics of the jukebox and then wait about 5 minutes for
> NetWorker to figure out that the serial number of the drive has changed.

Is this a Linux-only bug? I've replaced two drives since we upgraded from 
7.2 to 7.5.1 and haven't encountered this, but it's been on Solaris 9 / 
SPARC.

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER