Re: [Networker] NDMP shared device not releasing tape when other path requesting
2010-03-13 16:26:22
John,
Try going into the Jukebox properties via NMC and changing the "timers"
tab. There should be settings like "eject timer" or "idle timer" try
changing them both to like 5... then the system will eject tapes once
they're idle for 5 minutes... Or at least that is my understanding.
Alec
On Sat, Mar 13, 2010 at 2:44 PM, John Brekelbaum <jbrekelbaum AT gmail DOT
com>wrote:
> I have not had this problem in a while, but had to reconfigure library
> recently and now having annoying problem again where an NDMP backup will
> finish and the tape will stay mounted in the drive. Then a regular backup
> (non NDMP) will request a drive resource and still the NDMP will not eject
> the tape (like it is "not getting the message"). The previous time I had
> this problem it was a zoning issue but to my knowledge nothing has changed
> with zoning, only the juke box reconfig. Does anyone know what causes this
> frustrating behavior? Thanks.
> -John
>
> To sign off this list, send email to listserv AT listserv.temple DOT edu and
> type
> "signoff networker" in the body of the email. Please write to
> networker-request AT listserv.temple DOT edu if you have any problems with
> this
> list. You can access the archives at
> http://listserv.temple.edu/archives/networker.html or
> via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
>
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
|
|