Re: [Networker] HP-UX multiple Interfaces with same IP subnet
2008-06-27 00:03:40
Hi,
We tried this a couple of years ago. All clients who had the second NIC'
as "server network interface" sent their backup data to broadcast which
again caused our network to collapse. The answer from HP was that it is
not supported. HP-UX does not work correctly when two NIC's are configued
in the same subnet. The onlky way to do that is either using bundeled NIC's
or NIC's in different subnets.
Our solution was to buy the Auto Port Aggregation (APA. This allowed us to
bundle three NIC's into one VLAN(server LAN) and another three in a
different VLAN(deignated backup LAN) in two different subnets. As APA in
combination with Cisco only supports four bundeled NIC's this was the only
solution to utilize all our six NIC's
Sorry for the bad news.
Regards
Stein-Are Smoge
ICT Senior Consultant
Rolls-Royce Marine - ICT Operations - Head Office Ulsteinvik
Email:stein.are.smoge AT rolls-royce DOT com
Phone: +4770014298
Mobile: +4795721585
Fax: +4770014020
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
|
|