> 
> Hello, 
> Make sure , no one at your site uses Tape library functions to move,
> add  or eject tapes, Networker can get confused when work is 
> performed outside it's knowledge, 

Nope.

> then double check your Lib log and make sure nothing odd or errors which 
have not been corrected on the
> Tape Library. 

Nope. Nothing there either.

> Also make sure there have been no drive re-sequencing problems. 

Nope.

> I have seen this problems occasionally, even with everything being 
> right, You may have to remove the volume from media dB and re-lable. 

Worked for one tape, did not work for the other. I was able to label one 
tape with the proper label, but the 2nd continued to give that error, even 
after deleting the volume from the media db.

> Reseting lib\Networker via nsrjb -HEvv  should help. If it's an 

Tried that, too.

> repeating issue, you may need to work with EMC on it. 
> HTH

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER