Re: [Networker] Errors labeling tapes?
2007-12-14 14:10:16
> Under Windows 2003, every time you reboot or make changes, it's possible
> for the tape device name to change. For example \\.\tape0 might be a
> different physical device every time you reboot the server, reset the
> san switch, etc...
AH.
> There are a couple of solutions.
>
> 1) Remove the jukebox from Network and re-add the devices. You can use
> inquire to determine which tape drive is which by serial numbers, etc...
I can probably do this ...
> 2) If they are IBM lto drives, you can use the latest IBM tape drivers
> instead of the default windows ones. There is a setting in the release
> notes that changes the driver. Once the changes are active, instead of
> seeing \\.\tape0, etc..., you will see \\.\tapeSERIALNUMBER which won't
> change.
HP SDLT-320 drives in an HP library, actually. BUt thanks for the info.
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
|
|