Thank Mattew,
On the oracle server ,there are two nsrexecd processes.
I also installed networker client, NMO 4.2 on the oracle server.
I think maybe the problem is DNS.
Oracle server joins in DNS, Networker server doesnot.
Oracle server is a RAC system. I only backup on one node (i shuttdown
the other)
On this node, there are two network cards
1st card has: boot address, 2 oracle vip addresses,1 hearbeat address
2nd card has: oracle crs interconnect address
Do i need to declare all these addresses on the hosts file of networker server?
Matthew Huff wrote:
> Are the nsrexecd processes running on the oracle server? You need both the
> Networker client and the Networker Module for Oracle otherwise after starting
> the backup it will try to do various things including eventually using RSH to
> start the backup which may be the delay.
>
> If you have nsrexecd processes running check to see if the /nsr/res/servers
> specifify your legato server. Make sure that on the Legato Server and client
> they can resolve names both forward and backward.
>
> ________________________________
>
> From: EMC NetWorker discussion on behalf of huenian
> Sent: Mon 6/4/2007 3:28 AM
> To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
> Subject: [Networker] starting rman backup after 30min-channel allocating with
> NMO
>
>
>
> Hi everyone,
>
> This is my case:
> backup the oracle database on aix 5.2 (with networker client 7.2.1, NMO 4.2
> installed )
> networker server: 7.2.1 win2k3
> after paste the rman script below
>
> run {
> allocate channel t1 type 'sbt_tape';
> allocate channel t2 type 'sbt_tape';
> allocate channel t3 type 'sbt_tape';
> allocate channel t4 type 'sbt_tape';
> send 'NSR_ENV=(NSR_SERVER=legatoserver,NSR_DATA_VOLUME_POOL=mypool)';
> backup filesperset 10 format '/FULL_%d_%u/' incremental level 0 database plus
> archivelog skip inaccessible;
> release channel t1;
> release channel t2;
> release channel t3;
> release channel t4;
> }
>
> it takes 30 minutes (too long) to give the warning:
>
> Networker: cannot contact nsrexecd service on mycomputer
>
> and then it begins to rman backup
>
> I dont know why there is above warning, this affects on the time to
> allocating channel?
>
> I tested rpcinfo -p, ping, backup file from Networker GUI on this machine.
> Everything is OK excetp rman-backup database from command line.
>
>
> I tested on another oracle database, but it immediately backuped after
> pasting the rman script
>
> Thank you so much for your help
>
> +----------------------------------------------------------------------
> |This was sent by tan.pham AT gmail DOT com via Backup Central.
> |Forward SPAM to abuse AT backupcentral DOT com.
> +----------------------------------------------------------------------
>
> To sign off this list, send email to listserv AT listserv.temple DOT edu and
> type "signoff networker" in the body of the email. Please write to
> networker-request AT listserv.temple DOT edu if you have any problems with
> this list. You can access the archives at
> http://listserv.temple.edu/archives/networker.html or
> via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
>
> To sign off this list, send email to listserv AT listserv.temple DOT edu and
> type "signoff networker" in the body of the email. Please write to
> networker-request AT listserv.temple DOT edu if you have any problems with
> this list. You can access the archives at
> http://listserv.temple.edu/archives/networker.html or
> via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
+----------------------------------------------------------------------
|This was sent by tan.pham AT gmail DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|