Hi David, 

What name of device you are recognized?  Try it use  /dev/rmt/CxTxDxBestn. 
 

Petr Hanzlík
COMA ZÁLOHOVACÍ SYSTÉMY a.s.
Vítkovická 1
Ostrava 1       702 00
Czech Republic
Tel.:  ++420-59-6656377
Fax.: ++420-59-6656668
mailto:phanzlik AT coma DOT cz
mailto:726816 AT sms.eurotel DOT cz
http://www.coma.cz/
http://www.e-commercegroup.cz





Davina Treiber <Treiber AT HOTPOP DOT COM>
Odeslal: Legato NetWorker discussion <NETWORKER AT LISTSERV.TEMPLE DOT EDU>
15.02.2005 10:11
Odpovězte prosím uživateli Legato NetWorker discussion; Odpovězte prosím 
uživateli Davina Treiber
 
        Komu:   NETWORKER AT LISTSERV.TEMPLE DOT EDU
        Kopie: 
        Předmět:        HP-UX tape compression question


I have a NetWorker system with a shared library. The storage nodes are a
mixture of Solaris and HP-UX 11.11, and the tape drives are IBM
Ultrium-1. On the Solaris storage nodes and some of the HP-UX storage
nodes, I am seeing good compression figures, with anything between 200GB
and 500GB on each tape. On four of the HP-UX storage nodes I am seeing
no compression at all, the tapes fill at 103GB or 104GB. I cannot see
what the difference is between the HP-UX nodes that compress and the
ones that don't - they are all using the stape driver and mnb style
device names. I assume this is something to do with the options used on
mksf, but can't work out how to fix it. Are there any HP-UX gurus out
there who can advise me please?

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listserv.temple DOT edu or visit the list's Web site at
http://listserv.temple.edu/archives/networker.html where you can
also view and post messages to the list. Questions regarding this list
should be sent to stan AT temple DOT edu
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listserv.temple DOT edu or visit the list's Web site at
http://listserv.temple.edu/archives/networker.html where you can
also view and post messages to the list. Questions regarding this list
should be sent to stan AT temple DOT edu
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=