One thing you will want to do, is make the tape drive is enabled because
Networker will loop if it's disabled or in service mode.
This is a know bug.
3072022 nsrd: media info: unload retry for jukebox `STKL40' f
Hi Ed,
I have an update from Engineering now. This escalation has been closed and
with a designation of "will not fix" The reason is
related to the fundamental changes that are required and as such will not be
appropriate for implementation via a hotfix. There is
currently an RFE LGTpa56930 which is addressing major architectural changes for
nsrjb in future releases of NetWorker. These
changes would not occur in a maintenance release such as 7.1.2 etc. I have
added your name to the list of interested customers for
this issue. Hope I have not disappointed you too much. Let me know if it is
ok to close this case.
-----Original Message-----
From: Roy Kidder [mailto:RoyKidder AT YAHOO DOT COM]
Sent: Sunday, March 07, 2004 9:12 AM
Subject: Re: Automatic unmount/eject on DLT
That works perfectly. Thanks for the help!
Roy
Faidherbe, Thierry said:
> Well, there is nothing to configure to achieve what you want.
> NetWorker will not unmount/eject the tape automatically.
>
> Anyway, there is well a way to do it :
>
> create a script/batch file calling "nsrmm -j -u -f <tape device>"
>
> Look at notification and create a new one
> like "Tape mount request 3" using Event = Media,
> Level = Alert. As action, fill full path of your script
> (do not forget to use full nsrmm path and to chmod +x the script).
>
> When the event will occurs, script should be launched
> and the tape, unmounted and offlined.
> If you just want to have it unmounted but not offlined, remove the -j
> flag.
>
> HTH,
>
> Thierry
>
>
> Kind regards - Bien cordialement - Vriendelijke groeten,
>
> Thierry FAIDHERBE
>
> HP Services - Storage Division
> Tru64 Unix and Legato EBS Consultant
>
> ********* ********* HEWLETT - PACKARD
> ******* h ******* 1 Rue de l'aeronef/Luchtschipstraat
> ****** h ****** 1140 Bruxelles/Brussel/Brussels
> ***** hhhh pppp *****
> ***** h h p p ***** 100/102 Blv de la Woluwe/Woluwedal
> ***** h h pppp ***** 1200 Bruxelles/Brussel/Brussels
> ****** p ****** BELGIUM
> ******* p *******
> ********* ********* Phone : +32 (0)2 / 729.85.42
> Mobile : +32 (0)498/ 94.60.85
> Fax : +32 (0)2 / 729.88.30
> I N V E N T Email : thierry.faidherbe AT hp DOT com
> Internet : http://www.hp.com/
> ______________________________________________________________________
> __
>
> MOBISTAR SA/NV
>
> SYSTEM Team Charleroi, Mermoz 2 Phone : +32 (0)2 / 745.75.81
> Avenue Jean Mermoz, 32 Fax : +32 (0)2 / 745.89.56
> 6041 GOSSELIES Email : tfhaidhe AT mail.mobistar DOT be
> BELGIUM Web : http://www.mobistar.be/
> ______________________________________________________________________
> __
>
>
>
> -----Original Message-----
> From: Legato NetWorker discussion
> [mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU]
> On Behalf Of Roy Kidder
> Sent: Sunday, March 07, 2004 4:44 AM
> To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Subject: [Networker] Automatic unmount/eject on DLT
>
> Hello all.
>
> I'm using Networker 6.1.4 on Linux with a single DLT7000 drive. I've
> been trying to figure out how to get Networker to unmount and eject
> the current volume when the tape is full and it expects a new one to
> be inserted. Has anyone else had luck with this? Is there something
> I'm missing?
>
> Thanks in advance,
> Roy
>
> --
> Note: To sign off this list, send a "signoff networker" command via
> email to listserv AT listmail.temple DOT edu or visit the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you can
> also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|