-----Original Message-----
From: Wood, R A (Bob)
Sent: 22 October 2003 16:20
To: 'Legato NetWorker discussion'; 'Librado Pamintuan'
Subject: RE: [Networker] URGENT HELP on jbconfig
Sounds like hardware to me.
Has the 9714 been installed by an engineer?
Do you know if the devices have been connected and configured correctly?
Devices can be configured on the bus or off the bus depending if they
are on the same SCSI bus as the robotics. Check device setup for
duplicate SCSI addresses (this also includes a device with the same SCSI
id as the card in your machine.
I've had a 9714 for about 5 years and it is still plodding along, it has
some quirks but, once you have them nailed the box will give years of
good service.
Before you can go on with jbconfig, you must be able to see the devices
from the OS (I'm not familiar with AIX so I'll leave that side to
someone else).
Regards
Bob
-----Original Message-----
From: Librado Pamintuan [mailto:LPAMINTU AT REGINA DOT CA]
Sent: 22 October 2003 16:06
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: [Networker] URGENT HELP on jbconfig
Hello All,
We have a new backup server and we are trying to install the jukebox
(STK 9714 with 6 DLT 7000 drive), as soon as we run 'jbconfig' the
server initiates a system dump and reboots. Same thing also happens when
we run the 'inquire' command. Can somebody tell if this is an hardware
of software issue?
Environment: Unix-AIX 5.2
NetWorker: v6.1.3
Tape Libray: STK 9714
Thanks in advance,
Librado Pamintuan
Technical Support Analyst II
Information Systems Dep.
Operations Group
City of Regina
Phone: (306) 777-7573
General Fax: (306) 777-6804
eFax: (306) 546-6002
eMail: lpamintu AT regina DOT ca
>>> Ronald.Valvano AT UNILEVER DOT COM 10/22/03 08:44am >>>
Gary,
I believe the unwanted file will not be restored. You would only
perform one restore setting the browse time after the completion of
Wednesdays incremental The list of files presented for restore will look
the way the disk did after Wednesdays backup thus the file will not be
in the list. If you find this not to be true let me know.
Ronald D. Valvano
Unilever - North America
e-mail: ronald.valvano AT unilever DOT com
=============================================
May contain confidential and trade secret
information of Unilever Inc. and be subject to the
Economic Espionage Act 0f 1996. For recipient's
use only.
=============================================
-----Original Message-----
From: Novello, Guy [SMTP:GNovello AT PHCS DOT COM]
Sent: Wednesday, October 22, 2003 9:52 AM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: [Networker] Procedure for recoving a crashed disk
Greetings,
I have been asked to verify the process of recovering a failed disk.
Supposed we do a full backup on Sunday, and incrs on Monday and Tuesday.
On Wednesday, the disk fails.
I would think that during the recover, setting the browse time for
Wendesday, Networker would take what it needed from the full and the 2
incs. However, the question was asked about what happens if a unwanted
file was deleted on Sunday after the full. Is there a way Newtworker
would know that the file was delete and recovery is not wanted?
Thanks in advance.
Guy Novello
--
Note: To sign off this list, send a "signoff networker" command via
email to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can also
view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
--
Note: To sign off this list, send a "signoff networker" command via
email to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can also
view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
--
Note: To sign off this list, send a "signoff networker" command via
email to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can also
view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|
