Usually this is cause by a NIC set for auto on the speed instead of
hard-set for full/100

-----Original Message-----
From: Tammie Robertson
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Sent: 8/19/03 10:26 AM
Subject: [Networker] Very Slow Backups?

Win2000, Exabyte Mammoth2, Networker 6.1

We were experiencing some hard drive problems so our vendor had us
basically
replace everything from the drives to the SCSI Card one at a time.  Last
being the SCSI Card.  The hardware issues we had disappeared after
replacing
the SCSI Card but now my back ups are running much slower than before.
I am
running about 500kb now compared to high MB I was getting before.

Also for most of this period I was on Medical leave, vacation and away
at
training so I am not sure when the backup speed took a dive.

What could have been changed?

Thanks,




Tammie Robertson
Network Systems Administrator
Allied Machine & Engineering Corp.
330-343-4283


--
Note: To sign off this list, send a "signoff networker" command via
email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you have received this email in error please notify the system manager.
Please note that any views or opinions presented in this email are solely
those of the author and do not necessarily represent those of the company.
Finally, the recipient should check this email and any attachments for the
presence of viruses. The company accepts no liability for any damage caused
by any virus transmitted by this email.

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=