My configuration is running Sun E10K SAN with 9 domains incl. Legato
Networker server 6.1.2, Brokade switch, ATL P3000 Library with 6 tape drives
scsi over fibre.

Peter

-----Original Message-----
From: Fowler, Carter [mailto:CFowler AT CITY.LONDON.ON DOT CA]
Sent: Tuesday, August 27, 2002 9:28 AM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: Re: [Networker] nsrjb: SYSTEM error: I/O error

You might wish to check your controller for any device errors.  This usually
refers to either a bad drive or bad SCSI controller, if you're running
SCSI...

What's your system config?  You never mentioned that part of the equation...

Carter
Ext. 5711
cfowler AT city.london.on DOT ca



-----Original Message-----
From: prymwid AT TIAA-CREF DOT ORG
Sent: 2002-08-27 9:21 AM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU; prymwid AT TIAA-CREF DOT ORG
Subject: nsrjb: SYSTEM error: I/O error

HI everyone,
Did anyone come across situation when issuing command  nsrjb (with any
option) would produce

nsrjb: SYSTEM error: I/O error

Issue nsrjb command again and you get the right output.


Peter Rymwid

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=