I agree.  Auto media management is set to on for the jukebox but off for the
individual drives.

-----Original Message-----
From: Tim Mooney [mailto:mooney AT DOGBERT.CC.NDSU.NODAK DOT EDU]
Sent: Tuesday, August 13, 2002 2:19 PM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: Re: [Networker] Jukebox Config w/ STK L180

In regard to: Re: [Networker] Jukebox Config w/ STK L180, Chad R. Larson...:

>At 08:11 AM 8/13/02 , Passanesi, Scott wrote:
>>Automedia management is se to on and the eject
>>times are set within the jukebox configuration.
>
>As I read the manual, you aren't supposed to use automedia management on
>drives in a jukebox.  It is intended for stand-alone drives so you don't
>have to walk back to some terminal and say "go" after inserting a tape in a
>drive by hand.

There is a "jukebox-wide" auto media management setting, which you can see
in the Networker GUI under Media->Jukeboxes, that you often *do* want to
enable.  This allows for the jukebox to do various things on your behalf.

You're right that you probably don't want to fool with the per-drive
setting for drives in a jukebox, but the overall setting is very useful.

Tim
--
Tim Mooney                              mooney AT dogbert.cc.ndsu.NoDak DOT edu
Information Technology Services         (701) 231-1076 (Voice)
Room 242-J6, IACC Building              (701) 231-8541 (Fax)
North Dakota State University, Fargo, ND 58105-5164

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=