Hi Mario,
Looks like some detailed double-checking of the config is required - here
goes!
O - As Marcel points out, first you'll need to have an administrative user
registered with the same password upon the source and target TSM Server
instances.
O - Next, the High Level Address (HLA) of the target server needs (visible
in Q SERVER) to be resolvable/pingable from your shell/OS prompt on the
source server.
O - Finally, the Low Level Address (LLA) of the target server (visible in Q
SERVER) needs to be set to the TCPPort upon which the target server is
listening (e.g. visible from Q OPT output on target server).
>>> What about the TCP Port (lladdress)? I´ve configured different tcp ports
in each server....is that correct?
Your source and target TSM Server instances can run on the same TCPPORT if
they're running on different physical servers.
If all of these are in place and there aren't any other factors getting in
the way, PING SERVER commands should work and you'll have a platform for TSM
Server to Server operations.
HTH - let us know how you get on.
//DMc
London, UK - going to bed.
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Mario Behring
Sent: 17 July 2010 00:59
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [ADSM-L] Export server error
Hi David,
No...it is not successful...check the output below...I am calling the
servers TSM_SOURCE and TSM_TARGET to make this easier:
tsm: TSM_SOURCE>ping server tsm_target
ANR1705W Ping for server 'TSM_TARGET' was not able to establish a
connection.
ANS8001I Return code 4.
The same happens the other way around.
What about the TCP Port (lladdress)? I´ve configured different tcp ports in
each server....is that correct?
tsm: TSM_SOURCE>q server
Server Comm. High-level Low-level Days
Server
Name Method Address Address Since
Password
-------- ------ ------------- ---------
------ --------
TSM_TARGET TCPIP xx.xx.xx.xx 1919 <1 Yes
tsm: TSM_TARGET>q server
Server Comm. High-level Low-level Days
Server
Name Method Address Address Since
Password
-------- ------ ------------- ---------
------ --------
TSM_SOURCE TCPIP xx.xx.xx.xx 1500 <1 Yes
Regards,
Mario
________________________________
From: David McClelland <tsm AT NETWORKC.CO DOT UK>
To: ADSM-L AT VM.MARIST DOT EDU
Sent: Fri, July 16, 2010 7:56:06 PM
Subject: Re: Export server error
Hi Mario,
What does a `PING SERVER TSM_DEDALUS` from the source TSM Server admin CLI
give you - is this successful?
Cheers,
//David Mc
London, UK
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Mario Behring
Sent: 16 July 2010 22:44
To: ADSM-L AT VM.MARIST DOT EDU
Subject: [ADSM-L] Export server error
Hi list,
I am trying to export all data from a TSM Server to a new one. Both servers
are TSM 5.5.0.0 servers. I have defined the TARGET server on the SOURCE and
vice versa, specifying a password and TCP Port (lladdress) for both servers.
When I issue the EXPORT SERVER command with the PREVIEWIMPORT set to YES I
get the following error on the SOURCE server:
07/17/2010 18:29:44 ANR2017I Administrator ADMIN issued command: EXPORT
SERVER filed=all previewi=y tos=tsm_dedalus
(SESSION:
18790)
07/17/2010 18:29:44 ANR0984I Process 254 for EXPORT SERVER started in
the
BACKGROUND at 18:29:44. (SESSION: 18790, PROCESS:
254)
07/17/2010 18:29:44 ANR0609I EXPORT SERVER started as process 254.
(SESSION:
18790, PROCESS: 254)
07/17/2010 18:29:44 ANR0402I Session 18873 started for administrator
ADMIN
(Server) (Memory IPC). (SESSION: 18790, PROCESS:
254)
07/17/2010 18:29:45 ANR8214E Session open with 200.143.2.89 failed due
to
connection refusal. (SESSION: 18790, PROCESS: 254)
07/17/2010 18:29:45 ANR0561E EXPORT SERVER: Process aborted - sign on
to
server, TSM_SERVER, failed. (SESSION: 18790,
PROCESS:
254)
The problem is that the TARGET server is refusing the connection....but
why?? NO messages appear in the ACTLOG at the TARGET server.
What could be wrong? What am I missing?
Regards,
Mario
|
