Hi,
do you use Qlogic firmware&driver or SUN firmware&driver (SUN branded
HBA)? You need follow the information on the readme of the driver ->
ftp://ftp.software.ibm.com/storage/devdrvr/Solaris/IBMtape.README
8. Configuring with Fibre Channel HBAs
Depending if you use native Qlogic or SUN branded Qlogic follow the steps
for either qlogic or SUN.
Mit freundlichen Grüßen / Kind regards
Josef Weingand
Senior IT Specialist
Technical Sales Systems Storage
Mobil +49 171 55 26 783 - Homeoffice Tel. +49 8845 757421
Fax +49 171 13 5526783
email: weingand AT de.ibm DOT com
SMS/eMail: 01715526783 AT t-d1-sms DOT de
IBM Deutschland GmbH
Vorsitzender des Aufsichtsrats: Hans Ulrich Maerki
Geschäftsführung: Martin Jetter (Vorsitzender), Rudolf Bauer, Christian
Diedrich, Christoph Grandpierre, Matthias Hartmann, Thomas Fell, Michael
Diemer
Sitz der Gesellschaft: Stuttgart
Registergericht: Amtsgericht Stuttgart, HRB 14562 WEEE-Reg.-Nr. DE
99369940
Kelly Lipp <lipp AT STORSERVER DOT COM>
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
09.08.2007 05:22
Please respond to
"ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
To
ADSM-L AT VM.MARIST DOT EDU
cc
Subject
[ADSM-L] Configuring IBM LTO-4 DFA Drives in Solaris
Folks,
Trying to configure and use the IBMtape driver in Solaris with LTO-4 DFA
drives. Qlogic QLA-2342 is the card.
We've loaded the IBMtape driver. Have not rebooted with the -r to
reconfigure yet. Looking to understand how to set up IBMtape.conf
before we do that.
Anybody with a similar LTO2,3, or 4 configuration probably holds the key
for me! I'll go with "Hey, I'm not the Solaris guy so help me out..."
as my excuse for ignorance here.
As always, thanks in advance.
Kelly J. Lipp
VP Manufacturing & CTO
STORServer, Inc.
485-B Elkton Drive
Colorado Springs, CO 80907
719-266-8777
lipp AT storserver DOT com
|