Please review
http://www.mail-archive.com/adsm-l AT vm.marist DOT edu/msg70602.html
<http://www.mail-archive.com/adsm-l AT vm.marist DOT edu/msg70602.html>
Please review the mail archives before asking questions. Chances are, it's been
asked before. (I know; I asked.)
--
Mark Stapleton (mark.s AT evolvingsol DOT com <mailto:mark.s AT evolvingsol DOT
com> )
Senior consultant
________________________________
From: ADSM: Dist Stor Manager on behalf of Lee, Gary D.
Sent: Thu 4/12/2007 1:33 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: [ADSM-L] Trouble connecting to 3494 library
Configuration as follows
Tsm server v5.3.4 running on suse sles9 64 bit under vm 5.1
I have a macro defined to create a device class for 3592 cartridges,
define the library, drives, and paths to talk to the 3494 with two 3592
drives.
IBMatl, and IBMtape are both installed, mtlib works, I have issued
Mtlib -l3494a -vqV -V volser
Where volser is a real 3590 volume (used by another tsm server), and I
get back the appropriate information.
However, when I execute the macro below, when it gets to "defin path dax
quark . . . "
It just hangs. I have let it sit for 15 minutes, just hangs there.
Server is licenced for tsmee, tsmbasic, and dataret.
Where next??
Macro follows:
---------------- cut here ------------------------
def DEVCLASS 3592 DEVTYPE=3592 FORMAT=DRIVE ESTCAPACITY=700g
MOUNTLIMIT=2 MOUNTWAIT=60 MOUNTRETENTION=0 PREFIX=ADSM LIBRARY=quark
SET SERVERNAME dax
DEF LIBRARY quark LIBTYPE=349X PRIVATECATEGORY=500 SCRATCHCATEGORY=502
SHARED=NO
def PATH dax quark SRCT=SERVER DESTT=LIBRARY DEVICE=3494a ONLINE=YES
def DRIVE quark 800 ONLINE=Yes SERIAL=auto
def DRIVE quark 801 ONLINE=Yes SERIAL=auto
def PATH dax 800 SRCT=SERVER DESTT=DRIVE LIBR=quark DEVICE=/dev/IBMtape0
ONLINE=YES
def PATH dax 801 SRCT=SERVER DESTT=DRIVE LIBR=quark DEVICE=/dev/IBMtape1
ONLINE=YES
---------------------- end cut here --------------------------
Gary Lee
Senior System Programmer
Ball State University
phone: 765-285-1310
|