Re: New TSM Server, DB and STG POOL question
2006-03-16 03:53:32
TSM 5.1.6.2 on Solaris 2.7 - moving to 5.2.7.0 on Solaris 2.9
Hi all
Regarding Anton's check list below, I have a couple of questions.
1) Do I really need to delete and redefine the drives,libray,paths etc? I
understand that I will need to update the /dev/rmt/??? entry for the drives
to make sure they reflect how the drives are viewed on the new system. But
apart from that things should in my mind be exactly the same as before. As
far as the library is concerned, it's just an alias in the ibmatl.conf file
anyway and I know that works as I can use the mtlib command to interrogate
it. Am I missing something?
and...
2) Do I really need to run the 'checkin libv' commands. Looking at the
newly restored system I can see that TSM knows all the vols in the TAPEPOOL
and also the qlibv command shows me the volumes I also see on the still
live server. Again, am I missing something?
Many thanks again for this list Anton, much appreciated.
All the best
Farren Minns
|-----------------------------+-------------------------------------------|
| anton walde | |
| <nummer5lebt AT GMX DOT DE> |
|
| Sent by: "ADSM: Dist Stor | To|
| Manager" | ADSM-L AT VM.MARIST DOT EDU
|
| <ADSM-L AT VM.MARIST DOT EDU> |
cc|
| | |
| 15/03/2006 15:44 | Subject|
| | Re: [ADSM-L] New TSM |
| Please respond to | Server, DB and STG |
| "ADSM: Dist Stor | POOL question |
| Manager" | |
| <ADSM-L AT VM.MARIST DOT EDU> |
|
| | |
| | |
| | |
| | |
|-----------------------------+-------------------------------------------|
Hallo.
We changed our Hardware a year ago. We asked support to help us and got a
good hand-out with all the steps to make.
Here is the 'cook book':
1. you must have the samt TSM-Version on the old and new server.
2. migrate all diskpools to tape
3. backup the TSM-DB on the old server maybe to a file-devclass
( better for restore )
4. stop the old server
5. save all the config-files from the old server
( dsmserv.opt,dsmserv.dsk,devconfig.out,volhist.out,nodelock )
6. connect the libraryies to the new server
7. install the tsm device driver on the new server
all the following steps are on the new server
8. copy the config-files from step 5. to the new server, over
the existing!
9. create log-files and db-files with dsmserv format
10. check the config-files! for example the devconfig.out
for devclass,devices,pathes,etc.
11. restore the db from step 3.
12. change dsm.opt:
nomigrrecl
expinterval =
disablescheds yes
13. start the tsm-server in foreground ( dsmserv )
14. disable sessions
15. delete all paths, drives and libraries
16. define all paths, libraries and drives again
you must do step 15. and 16. because of possible changed scsi-id's
17. checkin libv <library> search=yes status=scratch checklabel=barcode
18. checkin libv <library> search=yes status=private checklabel=barcode
19. create the diskpools. If you have another directory-name for
the volumes, you must delete the old ones and define new ones.
20. If everything runs fine, stop the server ( halt server ), remove
the options you defined in step 12 from dsm.opt and start the
tsm-server as a service like you did on the old hardware
THAT'S IT!
Hope that helps you.
Kind regards
Robert Fijan
--
Bis zu 70% Ihrer Onlinekosten sparen: GMX SmartSurfer!
Kostenlos downloaden: http://www.gmx.net/de/go/smartsurfer
######################################################################
The information contained in this e-mail and any subsequent
correspondence is private and confidential and intended solely
for the named recipient(s). If you are not a named recipient,
you must not copy, distribute, or disseminate the information,
open any attachment, or take any action in reliance on it. If you
have received the e-mail in error, please notify the sender and delete
the e-mail.
Any views or opinions expressed in this e-mail are those of the
individual sender, unless otherwise stated. Although this e-mail has
been scanned for viruses you should rely on your own virus check, as
the sender accepts no liability for any damage arising out of any bug
or virus infection.
######################################################################
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- Re: New TSM Server, DB and STG POOL question, Kauffman, Tom
- Re: New TSM Server, DB and STG POOL question, anton walde
- Re: New TSM Server, DB and STG POOL question, Dirk Kastens
- Re: New TSM Server, DB and STG POOL question, Richard Rhodes
- Re: New TSM Server, DB and STG POOL question,
Farren Minns <=
- Re: New TSM Server, DB and STG POOL question, Dirk Kastens
- Re: New TSM Server, DB and STG POOL question, Farren Minns
- Re: New TSM Server, DB and STG POOL question, Farren Minns
- Re: New TSM Server, DB and STG POOL question, Dirk Kastens
- Re: New TSM Server, DB and STG POOL question, Farren Minns
Re: New TSM Server, DB and STG POOL question, Roger Deschner
|
|
|