DEFINE LIBRARY XX LIBTYPE=SCSI SHARED=YES AUTOLABEL=YES
DEFINE PATH servername libraryname SRCTYPE=SERVER DESTTYPE=LIBRARY 
DEVICE=lb3.1.0.5 ONLINE=YES 
DEFINE DRIVE libraryname DRIVE01 ELEMENT=257 ONLINE=Yes 
DEFINE PATH servername DRIVE01 SRCTYPE=SERVER DESTTYPE=DRIVE LIBRARY=3584LIB 
DEVICE=mt0.2.0.5 ONLINE=YES
DEFINE DEVCLASS 3584CL DEVTYPE=LTO FORMAT=ULTRIUMC MOUNTLIMIT=DRIVES 
MOUNTWAIT=10 MOUNTRETENTION=10 PREFIX=TSM LIBRARY=librayname WORM=NO

Edit library name, drive name etc. to your liking. Device id's and element 
numbers are to be taken from the OS and library manual.

Regards,

Karel
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of 
Brian Ipsen - Progressive IT A/S
Sent: dinsdag 15 november 2005 15:47
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Define tape library ?

Hi,
 
 Could someone provide me some quick help to get a new tapelibrary configured 
on my TSM server ?
It's a LTO2 tape robot, the drive has SCSI ID4, and the loader has SCSI ID 5
 
The library in question is this one: 
http://www-1.ibm.com/support/docview.wss?rs=663&uid=swg21116752
 
As far as I remember, the commands to be used, are something like:
 
define library MYLIB libtype=scsi
define drive MYLIB ???
define path pit-tsm TBERG-SUPERLOADER srctype=server desttype=library device=???
 
Is this the correct way ?? I'm not sure about the entries where I've put ??? - 
can anyone help ??
 
**********************************************************
Mvh/Rgds.
Brian Ipsen
PROGRESSIVE IT A/S

Århusgade 88, 3.sal     Tel: +45 3525 5070
DK-2100 København Ø     Fax: +45 3525 5090
Denmark                 Dir. +45 3525 5080
Email:bin AT progressive DOT dk

*********************************************************** 
 

---
This mail was scanned for virus and spam by Progressive IT A/S.
---