Hi Justin,

Select mediatype,count(*) from libvolumes group by mediatype


Then.. you will need to know which mediatype is which.

Matt.

_-'-_
  -|-


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Justin Case
Sent: Tuesday, October 26, 2004 3:10 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: select cmd question

We have a mixed tapes in our 3494 library we have 3590 20Gb tape
(shorts)
and we have 3590 extended tapes
and I need to make a count of the 3590 20Gb tapes, my question is there
a
select cmd to an mtlib cmd that would
return the count of the 3590 20Gb tape even if they are in use or
scratch
tapes ?
Thanks

Justin


___________________________ Disclaimer Notice __________________________
This message and any attachments are confidential and should only be read by 
those to whom they are addressed. If you are not the intended recipient, please 
contact us, delete the message from your computer and destroy any copies. Any 
distribution or copying without our prior permission is prohibited.

Internet communications are not always secure and therefore Powergen Retail 
Limited does not accept legal responsibility for this message. The recipient is 
responsible for verifying its authenticity before acting on the contents. Any 
views or opinions presented are solely those of the author and do not 
necessarily represent those of Powergen Retail Limited. 

Registered addresses:

Powergen Retail Limited, Westwood Way, Westwood Business Park, Coventry, CV4 
8LG.
Registered in England and Wales No: 3407430

Telephone +44 (0) 2476 42 4000
Fax +44 (0) 2476 42 5432