ADSM-L

Re: DDS4 drive cleaning problem

2004-06-29 12:19:03
Subject: Re: DDS4 drive cleaning problem
From: Gottfried Scheckenbach <gottfried.scheckenbach AT XTELLIGENT DOT DE>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Tue, 29 Jun 2004 18:18:17 +0200
Thanks Joe!

> If you issue "q libv" under status column for cleaning tape you should
> see "Cleaner"

Yes, the tape status is "cleaner"... I checked it in with "checkin
libvol lbdds4 clean stat=clean checklabel=no cleanings=50". Ok, I'll get
the tape checked tomorrow by someone who is onsite...

Regards,
Gottfried



Joe Crnjanski wrote:
We had before IBM dds4 6 tape autoloader.
I remember the biggest challenge is to tell TSM that one of the tapes is
cleaning tape.
Are you sure when you checked in cleaner that TSM knows it is cleaning
tape.
If you issue "q libv" under status column for cleaning tape you should
see "Cleaner"


Maybe I'm on the wrong track , but this is one of the suggestions.

Joe Crnjanski
Infinity Network Solutions Inc.
Phone: 416-235-0931 x26
Fax:     416-235-0265
Web:  www.infinitynetwork.com



-----Original Message-----
From: Gottfried Scheckenbach
[mailto:gottfried.scheckenbach AT XTELLIGENT DOT DE]
Sent: Tuesday, June 29, 2004 5:19 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: DDS4 drive cleaning problem


Hi all,

I have:
TSM-Server 5.2.2.5 on Win2003
tsmscsi.sys version 5.2.2.5123
DDS4 Autoloader (HP C5713A)
regulary checked in cleaning cartridge

On "clean drive" I get:

ANR8300E I/O error on library LBDDS4
(OP=8401C058, CC=306, KEY=02, ASC=3A, ASCQ=00,
SENSE=70.00.02.00.00.00.00.0E.0-
0.00.00.00.3A.00.00.00.00.F4.00.00.00.00.00.00.00.00.00.-
00.00., Description=Drive or media failure)


And in the event log it shows up (Source: TsmScsi):

A check condition error has occured on device \Device\lb5.1.0.3
during Move Medium with completion code DD_DRIVE_OR_MEDIA_FAILURE.
Refer to the device's SCSI reference for appropriate action.

Dump Data: byte 0x3E=KEY, byte 0x3D=ASC, byte 0x3C=ASCQ


Normal tape movements and read/write operations work without any error.
What's wrong here? Has anybody some hint?

Regards,
Gottfried


--

       _______________________________________________________
 \    / Gottfried.Scheckenbach AT xtelligent DOT de
  \  / Consultant Open Systems <> Mobil 0172-6710891
   \/
   /\ Xtelligent IT Consulting GmbH
  /  \ Am Kalkofen 8 <> D-61206 Woellstadt
 /    \ Tel./Fax. 0-700-98355443 <> http://www.xtelligent.de

Attachment: smime.p7s
Description: S/MIME Cryptographic Signature

<Prev in Thread] Current Thread [Next in Thread>