Re: Move Nodedata starts and ends without doing anything
2003-11-11 12:19:29
The Admin Ref says for Move Data:
You can use this command to move files from an offsite volume in a copy
storage
pool. Because the offsite volume cannot be mounted, the server obtains
the files
that are on the offsite volume from either a primary storage pool or
another copy
storage pool. These files are then written to the destination volumes
in the original
copy storage pool.
There is no similar statement in the documentation for Move Nodedata.
David
>>> Todd_Lundstedt AT VIA-CHRISTI DOT ORG 11/11/2003 12:01:40 PM >>>
Shouldn't it use primary storage volumes to get the data, just like a
reclamation or a move data for acc=offsite volumes?
>But nothing moved. What is wrong?
The tapes are offsite and thus the data can't be moved?
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- Move Nodedata starts and ends without doing anything, Todd Lundstedt
- Re: Move Nodedata starts and ends without doing anything, David E Ehresman
- Re: Move Nodedata starts and ends without doing anything, David E Ehresman
- Re: Move Nodedata starts and ends without doing anything, Todd Lundstedt
- Re: Move Nodedata starts and ends without doing anything,
David E Ehresman <=
- Re: Move Nodedata starts and ends without doing anything, Lee, Gary D.
- Re: Move Nodedata starts and ends without doing anything, Richard Sims
- Re: Move Nodedata starts and ends without doing anything, Richard Sims
- Re: Move Nodedata starts and ends without doing anything, Todd Lundstedt
- Re: Move Nodedata starts and ends without doing anything, Zoltan Forray/AC/VCU
|
|
|