Please check for the mximum no. of scrtahc volumes allowed in that pool. By
default it
used to be 50 in TSM 3.7 (where I had faced the same problem). Increase the no.
of scratch
volumes allowed.
Rgds
Gagan Singh Rana
"Never be afraid to try something new. Remember that a lone amateur built the
Ark. A large
group of professionals built the Titanic."
the Business Enterprise Solutions Team
QuantM Systems Pvt. Ltd.
79 Amrit Nagar, NDSE Part I
New Delhi - 110003
Voice : 91-11-4691575/4602217
Fax : 91-11-4691188
Mobile : 91-9810290940
DISCLAIMER :
The information in this e-mail is confidential and may be legally privileged.
It is
intended SOLELY for the addressee. Access to this e-mail by anyone else is
unauthorized.
If you are NOT the intended recipient, any disclosure, copying, distribution or
any action
taken on it is prohibited and may be unlawful. Any opinions or advice contained
in this
e-mail are subject to the terms and conditions expressed in the governing client
relationship engagement letter.
______________________________________________________________
Visit us at www.quantm.com
----- Original Message -----
From: "murali ramaswamy" <muralirama29 AT HOTMAIL DOT COM>
To: <ADSM-L AT VM.MARIST DOT EDU>
Sent: Tuesday, November 26, 2002 9:58 PM
Subject: Re: Please help - ANS1311E Server out of data storage space in TSM
> Hi,
> q stg gives output as shown at bottom. But still I get
> error while backing up (by automatic schedule) as below:
> Date/Time: 11/26/2002 10:03:15
> Message: ANR0522W Transaction failed for session 9 for node MURALI (WinNT)
> - no space available in storage pool
> BACKUPPOOL and all successor pools.
>
> Please help for a fix!
> thanks
> -murali
>
> ANS8000I Server command: 'q stg'
>
> Storage Pool Name: ARCHIVEPOOL
> Device Class Name: DISK
> Estimated Capacity (MB): 0.0
> Pct Util: 0.0
> Pct Migr: 0.0
> High Mig Pct: 90
> Low Mig Pct: 70
> Next Storage Pool: DISKPOOL2
>
> Storage Pool Name: BACKUPPOOL
> Device Class Name: DISK
> Estimated Capacity (MB): 0.0
> Pct Util: 0.0
> Pct Migr: 0.0
> High Mig Pct: 90
> Low Mig Pct: 70
> Next Storage Pool: DISKPOOL2
>
> Storage Pool Name: DISKPOOL
> Device Class Name: DISK
> Estimated Capacity (MB): 4.0
> Pct Util: 0.1
> Pct Migr: 0.0
> High Mig Pct: 90
> Low Mig Pct: 70
> Next Storage Pool: DISKPOOL2
>
> Storage Pool Name: DISKPOOL2
> Device Class Name: DISK
> Estimated Capacity (MB): 0.0
> Pct Util: 0.0
> Pct Migr: 0.0
> High Mig Pct: 90
> Low Mig Pct: 70
> Next Storage Pool:
>
> Storage Pool Name: FILPOOL1
> Device Class Name: FILEDEV1
> Estimated Capacity (MB): 0.0
> Pct Util: 0.0
> Pct Migr: 0.0
> High Mig Pct: 90
> Low Mig Pct: 70
> Next Storage Pool:
>
> Storage Pool Name: FILPOOL2
> Device Class Name: FILEDEV2
> Estimated Capacity (MB): 0.0
> Pct Util: 0.0
> Pct Migr: 0.0
> High Mig Pct: 90
> Low Mig Pct: 70
> more... (<ENTER> to continue, 'C' to cancel)
>
> Next Storage Pool:
>
> Storage Pool Name: SPACEMGPOOL
> Device Class Name: DISK
> Estimated Capacity (MB): 0.0
> Pct Util: 0.0
> Pct Migr: 0.0
> High Mig Pct: 90
> Low Mig Pct: 70
> Next Storage Pool:
>
>
> ANS8002I Highest return code was 0.
>
>
>
>
>
>
>
> >From: Joel Fuhrman <joelf AT CAC.WASHINGTON DOT EDU>
> >Reply-To: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
> >To: ADSM-L AT VM.MARIST DOT EDU
> >Subject: Re: Please help - ANS1311E Server out of data storage space in TSM
> >Date: Tue, 19 Nov 2002 17:36:21 -0800
> >
> >I had this once. I had plenty of scratch tapes, the disk pool was not full,
> >we do not use caching so there was no reason for the error. I bounced the
> >server and the error went away.
> >
> >On Tue, 19 Nov 2002, Sias Dealy wrote:
> >
> > > Murali,
> > >
> > > Sorry, I am reading too much into your e-mail.
> > >
> > > I just want to be clear on this.
> > > We have a TSM client that is backing up to a TSM server.
> > > The backup is failing due to the ANS message about the server
> > > out of storage space.
> > >
> > > Is the data going to a storage pool that is on the disk and
> > > then migrated to a tape library?
> > >
> > > On the TSM server and issue q stg, is there a storage pool that
> > > have a %Uil of 100? And if so, is this the disk pool or a tape
> > > pool?
> > >
> > > Sias
> > >
> > >
> > > ---- On Tue, 19 Nov 2002, murali ramaswamy
> > > (muralirama29 AT hotmail DOT com) wrote:
> > >
> > > > Hi,
> > > > I am not doing server-server communication. I have server
> > > and client on my
> > > > machine and a client on another machine in network that I
> > > want to backup.
> > > > Thanks
> > > > - murali
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > >From: Sias Dealy <hnre AT UREACH DOT COM>
> > > > >Reply-To: hnre AT ureach DOT com
> > > > >To: ADSM-L AT VM.MARIST DOT EDU
> > > > >Subject: Re: Please help - ANS1311E Server out of data
> > > storage space in TSM
> > > > >Date: Tue, 19 Nov 2002 18:28:23 -0500
> > > > >
> > > > >Murali,
> > > > >
> > > > >Are you doing server to server communication?
> > > > >If this is the case, the target server may not have enough
> > > > >space.
> > > > >
> > > > >Lower the migration threshold and check the actlog. There
> > > > >should be some message about the migration failing and there
> > > > >should also be our famous ANS1311E message.
> > > > >
> > > > >I know that you can add a volume to the target server. The
> > > > >command escapes me at the moment. I just don't do server to
> > > > >server communcation as often as I would like.
> > > > >
> > > > >Sias
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >________________________________________________
> > > > >Get your own "800" number
> > > > >Voicemail, fax, email, and a lot more
> > > > >http://www.ureach.com/reg/tag
> > > > >
> > > > >
> > > > >---- On , murali ramaswamy (muralirama29 AT HOTMAIL DOT COM)
> > > wrote:
> > > > >
> > > > > > Hi,
> > > > > > I am not mapping a drive. I added the IP address in the
> > > > >field while
> > > > > > creating the NODE for the other machine.
> > > > > > Thanks
> > > > > > -murali
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > >From: Sias Dealy <hnre AT ureach DOT com>
> > > > > > >Reply-To: <hnre AT ureach DOT com>
> > > > > > >To: "murali ramaswamy" <muralirama29 AT hotmail DOT com>, ADSM-
> > > > >L AT VM.MARIST DOT EDU
> > > > > > >Subject: Re: Re: Please help - ANS1311E Server out of
> > > data
> > > > >storage space in
> > > > > > >TSM
> > > > > > >Date: Tue, 19 Nov 2002 17:38:05 -0500
> > > > > > >
> > > > > > >
> > > > > > >Murali,
> > > > > > >
> > > > > > >If the data from the disk pool is not going to a tape
> > > pool
> > > > >but
> > > > > > >the data is going to another machine.
> > > > > > >I would check the network connection and also if that
> > > machine
> > > > > > >is up and running. If both checks out fine, then chech
> > > to see
> > > > > > >if there is enough space on the target machine.
> > > > > > >
> > > > > > >Are you mapping a drive to another machine? I would
> > > unmap and
> > > > > > >remap the drive. On Windows 2000 drive mapping is not as
> > > > > > >forgiving as NTFS on Unix.
> > > > > > >
> > > > > > >If everything checks fine.
> > > > > > >Lower the migration threshold and check the actlog to see
> > > > >what
> > > > > > >kind of error message that you are getting.
> > > > > > >
> > > > > > >A volume is just a file where TSM stores data. I'm not
> > > too
> > > > >sure
> > > > > > >if this would be consider a flat file or not.
> > > > > > >
> > > > > > >
> > > > > > >Sias
> > > > > > >
> > > > > > >---- On Tue, 19 Nov 2002, murali ramaswamy
> > > > > > >(muralirama29 AT hotmail DOT com) wrote:
> > > > > > >
> > > > > > > > Hi,
> > > > > > > > What is volume on Windows 2000 box? I dont have any
> > > > >backup
> > > > > > >tape drive
> > > > > > > > attached. I just back up to another location on the
> > > > >machine
> > > > > > >which was
> > > > > > > > created through the Device Configuration wizard on the
> > > > >Server
> > > > > > >GUI.
> > > > > > > > Thanks
> > > > > > > > -murali
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > >From: Sias Dealy <hnre AT UREACH DOT COM>
> > > > > > > > >Reply-To: hnre AT ureach DOT com
> > > > > > > > >To: ADSM-L AT VM.MARIST DOT EDU
> > > > > > > > >Subject: Re: Please help - ANS1311E Server out of
> > > data
> > > > > > >storage space in TSM
> > > > > > > > >Date: Tue, 19 Nov 2002 17:02:13 -0500
> > > > > > > > >
> > > > > > > > >Murali,
> > > > > > > > >
> > > > > > > > >To increase the storage pool, need to define a
> > > volume to
> > > > >that
> > > > > > > > >storage pool.
> > > > > > > > >
> > > > > > > > >define volume <pool name> </path/volume name>
> > > > >formatsize=<#>
> > > > > > > > >
> > > > > > > > >The formatsize value is in megabytes and you only
> > > have to
> > > > > > >put a
> > > > > > > > >number.
> > > > > > > > >
> > > > > > > > >If you get a message that the diskpool is out of
> > > storage,
> > > > > > >check
> > > > > > > > >the actlog to see if migration started. If migration
> > > did
> > > > > > >start
> > > > > > > > >were there an error message about the tape library.
> > > > > > > > >
> > > > > > > > >Sias
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >________________________________________________
> > > > > > > > >Get your own "800" number
> > > > > > > > >Voicemail, fax, email, and a lot more
> > > > > > > > >http://www.ureach.com/reg/tag
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >---- On , murali ramaswamy
> > > (muralirama29 AT HOTMAIL DOT COM)
> > > > > > >wrote:
> > > > > > > > >
> > > > > > > > > > Hi,
> > > > > > > > > > actlog gives following type of message? How do I
> > > > > > >increase
> > > > > > > > >space
> > > > > > > > > > in storage pool? I have 4GB space on my machine
> > > and
> > > > >how
> > > > > > >can
> > > > > > > > >it say no
> > > > > > > > > > space?
> > > > > > > > > >
> > > > > > > > > > ANR0522W Transaction failed for session 194 for
> > > node
> > > > > > > > > > CLONE1 (WinNT) - no space
> > > > > > >available in
> > > > > > > > >storage pool
> > > > > > > > > > BACKUPPOOL and all
> > > successor
> > > > >pools.
> > > > > > > > > > 11/19/2002 13:20:00 ANR0403I Session 194 ended
> > > for
> > > > >node
> > > > > > > > >CLONE1 (WinNT).
> > > > > > > > > >
> > > > > > > > > > Thanks
> > > > > > > > > > -murali
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > >
> > > > >
> > > >_______________________________________________________________
> > > > >_
> > > > > > >_
> > > > > > > > Add photos to your e-mail with MSN 8. Get 2 months
> > > FREE*.
> > > > > > > > http://join.msn.com/?page=features/featuredemail
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >________________________________________________
> > > > > > >Get your own "800" number
> > > > > > >Voicemail, fax, email, and a lot more
> > > > > > >http://www.ureach.com/reg/tag
> > > > > >
> > > > > >
> > > > > >
> > > >
> > > >_______________________________________________________________
> > > _
> > > > >_
> > > > > > MSN 8 with e-mail virus protection service: 2 months FREE*
> > > > > > http://join.msn.com/?page=features/virus
> > > > > >
> > > > > >
> > > >
> > > >
> > > >
> > > ________________________________________________________________
> > > _
> > > > MSN 8 with e-mail virus protection service: 2 months FREE*
> > > > http://join.msn.com/?page=features/virus
> > > >
> > > >
> > > >
> > >
> > >
> > > ________________________________________________
> > > Get your own "800" number
> > > Voicemail, fax, email, and a lot more
> > > http://www.ureach.com/reg/tag
> > >
>
>
> _________________________________________________________________
> MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*.
> http://join.msn.com/?page=features/virus
>
>
|
