If I understood your note correctly, you still have to put
the disk in a volume group, then create Raw LV's on that disk as
opposed to Fielsystems.

David Longo

>>> s.musovich AT AUCKLAND.AC DOT NZ 10/05/02 07:25AM >>>
I decided to try using raw disk for database volumes, so I allocated
some 10GB LUNs off our Shark.

The problem is when I define them in TSM, they come up as 128MB
volumes
(used both the rvpath and rhdisk devices).

Is there something I need to do in AIX to get them working?

(I also tested them by putting them in a volume group and they came up
as 10GB OK)

Suad
--


"MMS <health-first.org>" made the following
 annotations on 10/06/2002 10:36:06 AM
------------------------------------------------------------------------------
This message is for the named person's use only.  It may contain confidential, 
proprietary, or legally privileged information.  No confidentiality or 
privilege is waived or lost by any mistransmission.  If you receive this 
message in error, please immediately delete it and all copies of it from your 
system, destroy any hard copies of it, and notify the sender.  You must not, 
directly or indirectly, use, disclose, distribute, print, or copy any part of 
this message if you are not the intended recipient.  Health First reserves the 
right to monitor all e-mail communications through its networks.  Any views or 
opinions expressed in this message are solely those of the individual sender, 
except (1) where the message states such views or opinions are on behalf of a 
particular entity;  and (2) the sender is authorized by the entity to give such 
views or opinions.

==============================================================================