The only thing I would add to Don's excellent description is
(1a) checkout the tape with option REMOVE=NO
This will keep TSM from deciding to try to use the tape in the midde of
the mksysb.



_____________________________
William Mansfield
Senior Consultant
Solution Technology, Inc
630 718 4238




"Don France (TSMnews)" <DFrance-TSM AT ATT DOT NET>
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
05/03/2002 05:00 PM
Please respond to "ADSM: Dist Stor Manager"


        To:     ADSM-L AT VM.MARIST DOT EDU
        cc:
        Subject:        Re: mksysb or sysback to library volume


Try using tapeutil (or some 3575 library tool, like mtlib on 3494) to
mount
a tape in a given drive -- you must choose a scratch tape and ensure TSM
is
not using the drive;  then, issue (1) make drive "offline" to TSM, (2) the
cmd to mount the tape, (3) the cmd to mksysb to that device, then (4) the
cmd to dismount the tape... then, manually remove the tape from the
library
(else it's still in TSM's inventory and could get used unless you also
mark
it "private".)

Since sys. admin. time is more expensive than operator time, we usually
specify the AIX box to have internal 4mm tape drive, so we script the
mksysb
to that drive, daily;  operators rotate the tapes, report any visual
problems (if the script fails, the tape is not ejected), the script logs
are
used for admin. verification.

Regards,
Don

Don France
Technical Architect - Tivoli Certified Consultant

Professional Association of Contract Employees (P.A.C.E.)
San Jose, CA
(408) 257-3037
don_france AT att DOT net