Hi Gerardo,
Please do the following items, as appropriate:
1) I gather you are running the 3.7.0.0 client. I would recommend
upgrading to fixtest level 3.7.1.06, which fixes several
problems including the some cluster-related problems.
The fixtest can be downloaded from ftp site
ftp.software.ibm.com. The directory to go to is
storage/tivoli-storage-management/patches/client/v3r7
/Windows/v371/i386/.
From there you can choose the 'multi' or 'single' directory
if you want to download one large image, or several smaller
images (either way, you get the exact same code, it's whichever
is most convenient for you). Locate the files that begin with
IP21806_06. Be sure to read IP21806_06.README.FTP file first,
as it includes download and install information.
Also, at the top of the IP21806_06.README.FTP file is a list
of APARs fixed by this fixtest. IC25014 is probably causing
you the most grief, as it addresses the problem where you get
message:
ANS1107E Invalid option/value: '-ClusterNode='Yes''
2) When you install the service on the cluster system, be sure to
specify /CLUSTERNODE:YES and /GROUP:clustername in the
DSMCUTIL INSTALL command. "clustername" is the name of the cluster
in which the machine participates. (Yes, I know that /GROUP is a
poor name for the option; this should be fixed in an upcoming
PTF.) Also, the client options file (dsm.opt) that is used by
this service must have CLUSTERNODE YES in it.
3) When running DSMCUTIL SHOWPW or DSMCUTIL UPDATEPW for the node on
the cluster machine, you must specify the /CLUSTERNODE:YES and
/GROUP:clustername, just as you did when you installed the scheduler
service.
4) Do not "bounce" a node back & forth between CLUSTERNODE YES and
CLUSTERNODE NO, as this will wreak havoc with the encrypted
password in the registry (you will see symptoms like disappearing
node entries in the registry and authentication failures - rc 137 -
in dsmerror.log). If you configure a node for cluster support, then
always use the cluster support for that node.
5) The /CLUSTERNODE:YES and /GROUP:clustername options for DSMCUTIL
are applicable to scheduler services only. The web client services
(client acceptor, remote client agent) do not support these options.
Best regards,
Andy
Andy Raibeck
IBM
Tivoli Storage Manager Client Development
e-mail: storman AT us.ibm DOT com
"The only dumb question is the one that goes unasked."
I cant' get the scheduled backup to work for the cluster node. Here the
environment:
1. -Cluster name: s_modelo
2. -Nodes: s_coronita and s_moravia
3. -Volumes to backup:
Shared Disk Resource D: located in the 'IPSHA Disk Group 3' group at the
MSCS.
Sahred Disk Resource F: located in the 'Cluster Group' group at the MSCS.
4. -The system account used by the scheduler service is the Administrator
account, having all access privileges for the cluster resources.
5. -I'm using the following command to define the Scheduler Service for a
specific gropu in the cluster:
D:\ADSM\baclient>dsmcutil install /name:"TSM Scheduler Service for IPSHA
Group" /clientdir:d:\adsm\baclient /optfile:d:\adsm\baclient\ipsha_g3.opt
/node:ipshag3 /password:adsm /validate:no /autostart:yes /startnow:yes
/group:\\S_MODELO\
6. -I have tried many options when defining the '/group' parameter, i.e
/group:s_modelo
/group:\\s_modelo\
/grouo:\\s_modelo\d$
7. -If I specify teh option: '/clusternode:yes' when defining the service
with the 'dsmcutil install' command I get the following message at the
'dsmerror.log' file when starting the service:
03/13/2000 15:34:05 ANS1107E Invalid option/value: '-ClusterNode='Yes''
03/13/2000 15:34:20 ANS1107E Invalid option/value: '-ClusterNode='Yes''
8. -The 'dsmcutil list' commmand shows the following:
D:\ADSM\baclient>DSMCUTIL LIST
TSM Windows NT Client Service Configuration Utility
Command Line Interface Version 3.00.a
Last Updated Aug 18 1999
TSM Api Verison 4.1.0
Command: List Installed TSM Client Services
Machine: S_CORONITA (Local Machine)
Installed TSM Scheduler Services:
1. TSM Client Acceptor
2. TSM Remote Client Agent
3. TSM Scheduler Service for IPSHA Group 3
3 TSM Client Services were located.
9. -The 'dsmcutil query' command shows the following:
D:\ADSM\baclient>dsmcutil query /name:"TSM Scheduler Service for IPSHA
Group 3"
TSM Windows NT Client Service Configuration Utility
Command Line Interface Version 3.00.a
Last Updated Aug 18 1999
TSM Api Verison 4.1.0
Command: Query TSM Client Service Parameters
Machine: S_CORONITA (Local Machine)
Connecting to service 'TSM Scheduler Service for IPSHA Group 3' ...
Service Configuration/Status:
Service Name : TSM Scheduler Service for IPSHA Group 3
Logon Account : LocalSystem
Start Type : Auto
Current Status : Started
TSM Client Service Registry Settings:
Client Service Type = Client Scheduler Service
Client Directory = d:\adsm\baclient\dsmcsvc.exe
Options file = d:\adsm\baclient\ipsha_g3.opt
Event Logging = On
TSM Client Node = IPSHAG3
Comm Protocol = (value not currently set)
Server = (value not currently set)
Server Port = (value not currently set)
Schedule Log = (value not currently set)
Error Log = (value not currently set)
MSCS Enabled Node = (value not currently set)
Cluster group name = (value not currently set)
D:\ADSM\baclient>
**Note that there is no value for the 'Cluster group name' field although
specified in the 'dsmcutil install' command.
10. -The 'sched.log' file:
03/13/2000 15:25:22 Querying server for next scheduled event.
03/13/2000 15:25:22 Node Name: IPSHAG3
03/13/2000 15:25:22 Session established with server ADSM: Windows NT
03/13/2000 15:25:22 Server Version 3, Release 7, Level 1.0
03/13/2000 15:25:22 Server date/time: 03/13/2000 15:25:22 Last access:
03/13/2000 15:22:49
03/13/2000 15:25:22 --- SCHEDULEREC QUERY BEGIN
03/13/2000 15:25:22 --- SCHEDULEREC QUERY END
03/13/2000 15:25:22 Next operation scheduled:
03/13/2000 15:25:22 ------------------------------------------------------------
03/13/2000 15:25:22 Schedule Name: S_MODELO
03/13/2000 15:25:22 Action: Incremental
03/13/2000 15:25:22 Objects:
03/13/2000 15:25:22 Options:
03/13/2000 15:25:22 Server Window Start: 15:24:00 on 03/13/2000
03/13/2000 15:25:22 ------------------------------------------------------------
03/13/2000 15:25:22
Executing scheduled command now.
03/13/2000 15:25:22 --- SCHEDULEREC OBJECT BEGIN S_MODELO 03/13/2000
15:24:00
03/13/2000 15:25:22 Incremental backup of volume '\\S_MODELO\D$'
03/13/2000 15:25:23 ANS1228E Sending of object '\\s_modelo\d$' failed
03/13/2000 15:25:23 ANS1063E Invalid path specification
03/13/2000 15:25:25 --- SCHEDULEREC STATUS BEGIN
03/13/2000 15:25:25 --- SCHEDULEREC OBJECT END S_MODELO 03/13/2000 15:24:00
03/13/2000 15:25:25 Scheduled event 'S_MODELO' completed successfully.
03/13/2000 15:25:25 Sending results for scheduled event 'S_MODELO'.
03/13/2000 15:25:25 Results sent to server for scheduled event 'S_MODELO'.
03/13/2000 15:25:25 ANS1483I Schedule log pruning started.
03/13/2000 15:25:25 Schedule Log Prune: 65 lines processed. 0 lines
pruned.
03/13/2000 15:25:25 Pruned lines saved to d:\adsm\baclient\dsmsched.pru.
03/13/2000 15:25:25 ANS1484I Schedule log pruning finished successfully.
03/13/2000 15:25:25 Querying server for next scheduled event.
03/13/2000 15:25:25 Node Name: IPSHAG3
03/13/2000 15:25:25 Session established with server ADSM: Windows NT
03/13/2000 15:25:25 Server Version 3, Release 7, Level 1.0
03/13/2000 15:25:25 Server date/time: 03/13/2000 15:25:25 Last access:
03/13/2000 15:25:22
03/13/2000 15:25:25 --- SCHEDULEREC QUERY BEGIN
03/13/2000 15:25:25 --- SCHEDULEREC QUERY END
03/13/2000 15:25:25 Next operation scheduled:
03/13/2000 15:25:25 ------------------------------------------------------------
03/13/2000 15:25:25 Schedule Name: S_MODELO
03/13/2000 15:25:25 Action: Incremental
03/13/2000 15:25:25 Objects:
03/13/2000 15:25:25 Options:
03/13/2000 15:25:25 Server Window Start: 15:24:00 on 03/14/2000
03/13/2000 15:25:25 ------------------------------------------------------------
03/13/2000 15:25:25 Waiting to be contacted by the server.
11. -The 'error.log' file:
03/13/2000 15:40:53 ANS1228E Sending of object '\\s_modelo\d$' failed
03/13/2000 15:40:53 ANS1078S *** Unknown system error 3007; program ending
***
12. -There is no problem when launching a manual backup:
D:\ADSM\baclient>dsmc i -optfile=d:\adsm\baclient\ipsha_g3.opt
Tivoli Storage Manager
Command Line Backup Client Interface - Version 3, Release 7, Level 0.0
(C) Copyright IBM Corporation, 1990, 1999, All Rights Reserved.
Node Name: IPSHAG3
Session established with server ADSM: Windows NT
Server Version 3, Release 7, Level 1.0
Server date/time: 03/13/2000 16:27:40 Last access: 03/13/2000 16:25:30
Incremental backup of volume '\\S_MODELO\D$'
Directory--> 0 \\s_modelo\d$\ [Sent]
Directory--> 0 \\s_modelo\d$\ADSM [Sent]
Directory--> 0 \\s_modelo\d$\AEUSARIO [Sent]
Directory--> 0 \\s_modelo\d$\GEZATMP [Sent]
Directory--> 0 \\s_modelo\d$\tsm_img [Sent]
Directory--> 0 \\s_modelo\d$\USUARIOF [Sent]
Directory--> 0 \\s_modelo\d$\AEUSARIO\AE [Sent]
Directory--> 0 \\s_modelo\d$\AEUSARIO\AEFORMA [Sent]
Directory--> 0 \\s_modelo\d$\AEUSARIO\AEFRP [Sent]
Directory--> 0 \\s_modelo\d$\AEUSARIO\AEMACRO [Sent]
Directory--> 0 \\s_modelo\d$\AEUSARIO\AESECESC [Sent]
Directory--> 0 \\s_modelo\d$\AEUSARIO\AESPOOL [Sent]
Directory--> 0 \\s_modelo\d$\AEUSARIO\Archivo General 2
[Sent]
Directory--> 0 \\s_modelo\d$\AEUSARIO\cds [Sent]
Directory--> 0 \\s_modelo\d$\AEUSARIO\CutsII [Sent]
Directory--> 0 \\s_modelo\d$\AEUSARIO\DCOTOS [Sent]
Directory--> 0 \\s_modelo\d$\AEUSARIO\DOCTOS [Sent]
Directory--> 0 \\s_modelo\d$\AEUSARIO\IMAGENES [Sent]
Directory--> 0 \\s_modelo\d$\AEUSARIO\kodak [Sent]
Directory--> 0 \\s_modelo\d$\AEUSARIO\MCH [Sent]
Directory--> 0 \\s_modelo\d$\AEUSARIO\quickdb [Sent]
Directory--> 0 \\s_modelo\d$\AEUSARIO\sae [Sent]
Normal File--> 148,356 \\s_modelo\d$\AEUSARIO\icons_vb.zip [Sent]
Directory--> 0 \\s_modelo\d$\AEUSARIO\AEFORMA\COREL
[Sent]
Directory--> 0 \\s_modelo\d$\AEUSARIO\AEFORMA\FormFlow
[Sent]
Normal File--> 641,078 \\s_modelo\d$\AEUSARIO\AEFORMA\0060 19
FEB.dib
[Sent]
Normal File--> 761,078 \\s_modelo\d$\AEUSARIO\AEFORMA\0060.dib
[Sent]
Normal File--> 641,078 \\s_modelo\d$\AEUSARIO\AEFORMA\0061.dib
[Sent]
Normal File--> 527,958 \\s_modelo\d$\AEUSARIO\AEFORMA\0301.DIB
[Sent]
Normal File--> 847,398 \\s_modelo\d$\AEUSARIO\AEFORMA\0404.dib
[Sent]
Normal File--> 946,578 \\s_modelo\d$\AEUSARIO\AEFORMA\0405.dib
[Sent]
Normal File--> 897,778 \\s_modelo\d$\AEUSARIO\AEFORMA\0410.DIB
[Sent]
Normal File--> 319,462 \\s_modelo\d$\AEUSARIO\AEFORMA\0512.dib
[Sent]
Normal File--> 753,078 \\s_modelo\d$\AEUSARIO\AEFORMA\0513.DIB
[Sent]
Normal File--> 753,078 \\s_modelo\d$\AEUSARIO\AEFORMA\0521.DIB
[Sent]
Normal File--> 765,238 \\s_modelo\d$\AEUSARIO\AEFORMA\0541.dib
[Sent]
Normal File--> 765,238 \\s_modelo\d$\AEUSARIO\AEFORMA\0542.dib
[Sent]
Normal File--> 765,238 \\s_modelo\d$\AEUSARIO\AEFORMA\0545.dib
[Sent]
Normal File--> 953,078 \\s_modelo\d$\AEUSARIO\AEFORMA\0666.DIB
[Sent]
Normal File--> 953,078 \\s_modelo\d$\AEUSARIO\AEFORMA\0667.DIB
[Sent]
Normal File--> 969,678 \\s_modelo\d$\AEUSARIO\AEFORMA\101.dib
[Sent]
Normal File--> 969,678 \\s_modelo\d$\AEUSARIO\AEFORMA\101a.dib
[Sent]
Normal File--> 91,786 \\s_modelo\d$\AEUSARIO\AEFORMA\112.DIB
[Sent]
Normal File--> 785,078 \\s_modelo\d$\AEUSARIO\AEFORMA\248.DIB
[Sent]
Normal File--> 93,062 \\s_modelo\d$\AEUSARIO\AEFORMA\248.OLD
[Sent]
Normal File--> 691,278 \\s_modelo\d$\AEUSARIO\AEFORMA\515.dib
[Sent]
Normal File--> 691,278 \\s_modelo\d$\AEUSARIO\AEFORMA\515a.dib
[Sent]
Normal File--> 743,638 \\s_modelo\d$\AEUSARIO\AEFORMA\531.dib
[Sent]
Normal File--> 936,378 \\s_modelo\d$\AEUSARIO\AEFORMA\666.DIB
[Sent]
13. -The 'dsm.opt' file:
Commmethod tcpip
tcpport 1500
TCPServeraddress 150.1.32.14
COMPression ON
NODENAME IPSHAg3
DOMAIN d:
Exclude "*:\macintosh volume\*"
Exclude "*:\macintosh volume\*.*"
Exclude "*:\macintosh volume\...\*"
Exclude "*:\macintosh volume\...\*.*"
Exclude "*:\microsoft uam volume\*"
Exclude "*:\microsoft uam volume\*.*"
Exclude "*:\microsoft uam volume\...\*"
Exclude "*:\microsoft uam volume\...\*.*"
Exclude "*:\...\EA DATA. SF"
Exclude *:\...\pagefile.sys
Exclude *:\IBMBIO.COM
Exclude *:\IBMDOS.COM
Exclude *:\MSDOS.SYS
Exclude *:\IO.SYS
Exclude *:\...\SYSTEM32\CONFIG\*.*
Exclude *:\...\SYSTEM32\CONFIG\...\*
Exclude *:\...\*.TMP
Exclude *:\...\*.~MP
Exclude *:\...\*.BAK
Exclude *:\...\*.MP3
Exclude *:\...\*.TMP
Exclude *:\...\*.CUR
Exclude *:\...\*.BAT
Exclude *:\...\*.INF
Exclude *:\...\*.FON
Exclude *:\...\*.SCR
Exclude *:\...\*.VXD
Exclude *:\...\*.OCX
Exclude *:\...\*.BIN
Exclude *:\...\*.TTF
Exclude *:\...\*.DLL
Exclude *:\...\*.CAB
Exclude *:\...\*.SYS
Exclude *:\...\*.COM
Exclude *:\...\*.DRV
Exclude *:\...\*.EXE
Exclude *:\...\*.MP3
Exclude *:\...\*.MP2
Exclude *:\...\*.HTM
Exclude *:\...\*.HTML
* DIRECTORIOS NO RESPALDADOS DE D:
Exclude d:\adsm\...\*
Exclude.dir *:\adsm\...\*
Exclude.dir *:\recycler
Exclude.dir *:\software
Exclude.dir *:\tsm_img\...\*
Exclude *:\aeusario\cds\...\*
* DIRECTORIOS NO RESPALDADOS DE F:
Exclude *:\db2\...\*
Exclude *:\db2bk\...\*
Exclude *:\db2profs\...\*
Exclude *:\impresor\...\*
Exclude.dir *:\recycler
Exclude *:\spool\...\*
* DIRECTORIO A RESPALDAR DE D: Y F:
Include *:\aeusario\aespool\...\*.* cold
*Include *:\aeusario\imagenes\...\*.* imaging
Include *:\usuariof\...\*.*
Include *:\usuarios\...\*.*
SUbdir Yes
TAPEPROMPT YES
BACKUPREG YES
ERRORLOGRETENTION 15 S
SCHEDLOGRETENTION 10 S
SCHEDMODE PROMPTED
passwordaccess generate
clusternode yes
schedlogname d:\adsm\baclient\ipsha_sched.log
errorlogname d:\adsm\baclient\ipsha_error.log
I think there is a syntax problem when defining the Scheduler
Service parameter for '/group:clustername'. If you take a look
at the 'dsmcutil query' command output there is no value for
'Cluster group name': Cluster group name = (value not
currently set).
Thanks in advance,
Regards
Gerardo Zapata Gonzalez
Tivoli Professional Services
IBM de Mixico
(52 5) 270 5740
|
