> what version of ADSM are you using? Is the VLS-SDX supported?

solaris/ADSM-3.1.2.1. No :), but the problem we are seing are
probably related to the mechs (regular sony AITs).. not the library per se.

oh well,


> Thanks,
> Mark

>
>
> > -----Original Message-----
> > From: Fredrik Lundholm [SMTP:exce7 AT CE.CHALMERS DOT SE]
> > Sent: Wednesday, January 20, 1999 4:30 AM
> > To:   ADSM-L AT VM.MARIST DOT EDU
> > Subject:      I/O error reading label using AIT drives.
> >
> > I often get spurious:
> > ANR8355E I/O error reading label for volume CE11 in drive A
> > (/dev/rmt/2mt).
> > ANR1402W Mount request denied for volume CE11 - volume unavailable.
> > ANR1410W Access mode for volume CE11 now set to     "unavailable".
> >
> > This happens with several tapes and both our drives in our brand new
> > ADIC VLS-SDX dual AIT changer. I tried cleaning the mechs to no avail...
> >
> > Some tapes are only filled with one or two gigabytes when this happens and
> > some are fille with 40-55 GB of data.
> >
> > What could possibly be wrong?
> >
> > /wfr
> > --
> > Fredrik Lundholm
> > exce7 AT ce.chalmers DOT se
>
>

/thanks
--
Fredrik Lundholm
Fredrik Lundholm
exce7 AT ce.chalmers DOT se