If you use a mount exit, you can issue whatever you want as a request to
the operator, as long at the drive is attached to ADSM R/O if the tape was
requested R/O. There is a sample DSMMOUNT EXEC in the ADMIN GUIDE that is
similar to what you need - Figure 15. You can change the MOUNT command to
issue whatever message your operators will understand and put in some code to
issue the ATTACH to the server with R/O if the mountmode is R/O.
  Carol Trible
  ADSM Development

>   Date:    Tue, 4 Mar 1997 16:19:00 -0600
>   From:    "Bohnsack, JA Jim (6030)" <BohnsackJA AT GVL.ESYS DOT COM>
>   Subject: Tape mounts
>
>   I'm running a V2 VM server and have a problem with operators who don't
>   or can't read the tape mount messages and differentiate between "NO
>   RING" or "RING IN".  Is there anything that I can do that will cause the
>   server to always request a "RING IN" tape.  Our other backup s/w does
>   this.  We trust our s/w not to write when it shouldn't.
>
>   Jim Bohnsack
>   Raytheon E-Systems